Hello,
New to this forum environment but have done quite a bit of home brew tuning with GM 1227747 and 1227730 ecms. Are there any $E6 binaries around so I can start playing with a new ecm?
Hello,
New to this forum environment but have done quite a bit of home brew tuning with GM 1227747 and 1227730 ecms. Are there any $E6 binaries around so I can start playing with a new ecm?
I'd mess with the $0D binaries. The $0D will run in the 16168625 PCM, has more work put into it and thus more tune ability. There are also more stock $0D binaries for download on this website compared to $E6.
http://www.gearhead-efi.com/Fuel-Inj...Information-0D
Thanks c5wagner I'll dig into the $0D binaries. I have an ecm with the V6 calpak so i have to find a V8 one to install a flash chip on. I will let you know how things progress. Again thanks for the info!
I sort of remember a document floating around(years ago, probably close to 20 years) so you could modify the NETRES(Limp, resistor network), basically mimic what GM did with the 305/350/454, of the memcals. Does anyone have a copy or link to the information?
-Carl
Bookmarks