Results 1 to 4 of 4

Thread: ebl flash 2 question

  1. #1
    Carb and Points!
    Join Date
    Apr 2019
    Age
    41
    Posts
    1

    ebl flash 2 question

    So as i browse and read i notice that people are referring to their ecu number as far as everything goes. Now since i replaced my ecu with the ebl flash 2 from Dynamic EFI what number would i use in reference?

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Good question.

    I think EBL or EBL Flash 2 would be a good name to use when posting.

    Most members use factory computers, not very many members use Dynamic EFI computers.

    dave w

  3. #3
    Fuel Injected! PlayingWithTBI's Avatar
    Join Date
    Dec 2018
    Location
    Tonopah, AZ
    Age
    70
    Posts
    341
    I just ordered the EBL Flash 2 for my 88 C1500 7747 ECM. I'm going to have plenty of questions and a big learning curve. I found this thread on thirdgen.org going back years to last week, there's a lot of good info there.

    https://www.thirdgen.org/forums/diy-...uning-ebl.html

  4. #4
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    The EBL systems were based on C3 ecm's for years. 1227747 is one of many part numbers that would apply. Bob has created EBL for the P4 ecm family as well so the 1227730 and similar numbers may be included. You may have to contact Dynamic EFI to determine which OEM number your ecm should be listed under.

Similar Threads

  1. LT1 pcm won't flash anymore.
    By babywag in forum GM EFI Systems
    Replies: 7
    Last Post: 10-06-2018, 12:06 AM
  2. 383 tbi ebl flash
    By twistedc1500 in forum GM EFI Systems
    Replies: 4
    Last Post: 05-02-2018, 11:46 PM
  3. Ebl flash
    By Stokes1114 in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 01-15-2017, 10:33 PM
  4. Error trying to flash PCM! (Pic)
    By germ79 in forum GM EFI Systems
    Replies: 7
    Last Post: 06-01-2016, 03:20 AM
  5. E38 full flash using TC
    By Montecarlodrag in forum TunerCat OBDII
    Replies: 19
    Last Post: 03-22-2016, 06:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •