Page 1 of 2 12 LastLast
Results 1 to 15 of 30

Thread: Vortech, 502 mag 525hp manifolds

  1. #1
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811

    Vortech, 502 mag 525hp manifolds

    I can't remember which thread it was in but someone mentioned the marine vortech manifolds which reminded me that I have some things laying around. Pardon the dust in the pics, lol
    -Carl

  2. #2
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    Ummmm, let me try to post the pics again.

    As you can tell by the dust the price could be right. Let me know if anyone is interested, shoulda ebay'd this stuff forever ago. I'll blow stuff off and take better pics if anyone wants something.
    Attached Images Attached Images
    Last edited by In-Tech; 03-27-2019 at 03:38 PM.
    -Carl

  3. #3
    Fuel Injected! PJG1173's Avatar
    Join Date
    Nov 2011
    Location
    Jacksonville NC
    Age
    50
    Posts
    641
    are all those big block intakes?
    87 4Runner, 15" spring lift, 3" body, chevy vortec 355, 5.29 gears, 38.5x15.5x15" Boggers, 280hr, 16168625 running $0D
    93 S10, 36x12.5x15 TSL's, custom turbo headers, 266HR cam, p&p vortec heads, $0D Marine MPFI with 8psi boost.
    05 Silverado, 2' lift, 4" exhaust, Bully Dog programmer,

  4. #4
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    I think I have 4 525hp BBC intakes, 1 502 mag intake(All rectangular port), 2 scorpion SBC vortec intakes and 2 regular SBC vortec intakes. All of these are marine intakes meaning the water thermostat crossover has the brass inlay. I would have to check the SBC intakes to make sure they are cast iron and not plastic, pretty sure iron or aluminum but didn't look.
    -Carl

  5. #5
    Fuel Injected! PJG1173's Avatar
    Join Date
    Nov 2011
    Location
    Jacksonville NC
    Age
    50
    Posts
    641
    pm sent
    87 4Runner, 15" spring lift, 3" body, chevy vortec 355, 5.29 gears, 38.5x15.5x15" Boggers, 280hr, 16168625 running $0D
    93 S10, 36x12.5x15 TSL's, custom turbo headers, 266HR cam, p&p vortec heads, $0D Marine MPFI with 8psi boost.
    05 Silverado, 2' lift, 4" exhaust, Bully Dog programmer,

  6. #6
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Euless, TX
    Posts
    2,308
    I would love a closer look at one of those Scropion 383 intakes please.

  7. #7
    Fuel Injected! PJG1173's Avatar
    Join Date
    Nov 2011
    Location
    Jacksonville NC
    Age
    50
    Posts
    641
    I was thinking that too but looking at the pictures the TB would be facing the brake booster in a car/truck application.
    87 4Runner, 15" spring lift, 3" body, chevy vortec 355, 5.29 gears, 38.5x15.5x15" Boggers, 280hr, 16168625 running $0D
    93 S10, 36x12.5x15 TSL's, custom turbo headers, 266HR cam, p&p vortec heads, $0D Marine MPFI with 8psi boost.
    05 Silverado, 2' lift, 4" exhaust, Bully Dog programmer,

  8. #8
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Euless, TX
    Posts
    2,308
    Quote Originally Posted by PJG1173 View Post
    I was thinking that too but looking at the pictures the TB would be facing the brake booster in a car/truck application.
    IF the plenum is designed the same way as the Indmar intake I have, it will bolt on either direction or very easily be modified to.

  9. #9
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    Hiyas, I will take some better pics later today.
    -Carl

  10. #10
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    Sorry for the delay, I've been laid up in bed the last couple days. I'll get some better pics next time I am at the shop.
    -Carl

  11. #11
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    No worries. Health comes first.

  12. #12
    Fuel Injected!
    Join Date
    May 2011
    Location
    Pocono's PA.
    Age
    50
    Posts
    370
    Quote Originally Posted by In-Tech View Post
    I think I have 4 525hp BBC intakes, 1 502 mag intake(All rectangular port), 2 scorpion SBC vortec intakes and 2 regular SBC vortec intakes. All of these are marine intakes meaning the water thermostat crossover has the brass inlay. I would have to check the SBC intakes to make sure they are cast iron and not plastic, pretty sure iron or aluminum but didn't look.

    I would be interested in one (or more) of the 525 MAG BBC intakes if the price is right .

    Are these complete with TB and fuel rails / injectors ?

    P/M on here or email tomsnastyz@yahoo.com with pics and price .

    Thanks

    TOM
    1994 3500 Dually , 502 (509) , 264HR , Edelbrock MPFI , PFI '7427
    1992 S-10 434 SBC/Tremec - '7427
    1986 Monte Carlo SS
    1984 S-10 , SAS, 496/700R4/205 , D44/14BFF -'7427
    1980 Z-28 496/700R4
    1979 Corvette 496/700R4
    1977 Olds 98 Regency 403/700R4

  13. #13
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    Quote Originally Posted by Fast355 View Post
    I would love a closer look at one of those Scropion 383 intakes please.
    Ah Heck, here I am at the shop at 2:15 in the morn, gotta get a bit of work done. Here's some pics of the scorpion. Turning the top around is possible but will take a bit of work. The factory setup used a 2 wire ford type IAC so that would have to be blocked off to turn it around. Also, once turned around you would need to drill and tap the base as some of the bolt holes won't line up. Not that big a deal but would have to be addressed. Also the 90mm TB doesn't have an IAC provision so you would have to run an external IAC adapter. Next time I am over there I will take a pic of one and post. Basically a hose will go to the adapter which is billet aluminum and a stock gm IAC bolts to it.

    I hate bog the forum down with too much bandwidth on pictures so please PM with email address and I will try to get any more info and pics to anyone that way. As for the TB pics, I really need to remove them and measure with a dial caliper and I will another time.
    Attached Images Attached Images
    -Carl

  14. #14
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    I also found this which is pretty cool. It's a vortec dual plane intake with a 90mm TB. :) It is cast iron.
    Attached Images Attached Images
    -Carl

  15. #15
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    811
    Btw, anything I sell, I will clean and flow test the injectors, this stuff has been around a few years. I will also run everything down to the machine shop and run through the parts washer for a few minutes to clean up so they look new.
    -Carl

Similar Threads

  1. Replies: 49
    Last Post: 08-17-2015, 11:07 PM
  2. Read these exhaust manifolds
    By JeepsAndGuns in forum Gear Heads
    Replies: 4
    Last Post: 08-05-2013, 03:04 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •