Vortech, 502 mag 525hp manifolds

**Nasty-Z** · 04-01-2019

Originally Posted by In-Tech

I think I have 4 525hp BBC intakes, 1 502 mag intake(All rectangular port), 2 scorpion SBC vortec intakes and 2 regular SBC vortec intakes. All of these are marine intakes meaning the water thermostat crossover has the brass inlay. I would have to check the SBC intakes to make sure they are cast iron and not plastic, pretty sure iron or aluminum but didn't look.

I would be interested in one (or more) of the 525 MAG BBC intakes if the price is right .

Are these complete with TB and fuel rails / injectors ?

P/M on here or email tomsnastyz@yahoo.com with pics and price .

Thanks

TOM

**In-Tech** · 04-02-2019

Originally Posted by Nasty-Z

I would be interested in one (or more) of the 525 MAG BBC intakes if the price is right .

Are these complete with TB and fuel rails / injectors ?

P/M on here or email tomsnastyz@yahoo.com with pics and price .

Thanks

TOM

Pics sent to your email.

**In-Tech** · 04-02-2019

Hiya folks,
The vortec intakes are $300 ea. plus freight and again, I will clean the injectors(in house) before shipment. Keep in mind these are cast iron so they are heavy. Freight will be actual cost. Looks like we are going to keep the scorpion intakes and 1 525hp manifold. There are 3 of us in our ~17,000 sq ft shop and me and Peter are partners on the intakes since we both did those blower installs. I haven't gotten him to nail down a price on the 525hp intakes yet(I was told I was too cheap) but hopefully by tomorrow morning. Any questions or additional pictures needed, let me know. Thanks all.

**Fast355** · 04-02-2019

Originally Posted by In-Tech

Hiya folks,
The vortec intakes are $300 ea. plus freight and again, I will clean the injectors(in house) before shipment. Keep in mind these are cast iron so they are heavy. Freight will be actual cost. Looks like we are going to keep the scorpion intakes and 1 525hp manifold. There are 3 of us in our ~17,000 sq ft shop and me and Peter are partners on the intakes since we both did those blower installs. I haven't gotten him to nail down a price on the 525hp intakes yet(I was told I was too cheap) but hopefully by tomorrow morning. Any questions or additional pictures needed, let me know. Thanks all.

I am interested in the dual plane if it is included in the Vortecs. What part of the world are you located in?

**In-Tech** · 04-02-2019

I am in Fresno, CA and yes, $300 for that one too. I only have the one of those and sold one of the other vortec's already(The stock truck type looking manifold with the TB towards the front.
Thanks,
-Carl