bin file for lt4 hot cam in tpi. 1227730 pcm 700r4 trans.

**Andy61vette** · 03-25-2019

i am looking for a good starter bin file for my tpi swapped car to get started. its just a tpi with lt4 hot cam and 7730 pcm. i dont know what the pcm came out of. id like a good starter file so i can run it at start data logging. it does run right now. no power, pig rich, and no timing. i have the capability to make changes but im in a time chrunch and was hoping for a good starter file. thanks

**stew86MCSS396** · 03-25-2019

730 is from 90-92 F-body.

**In-Tech** · 03-25-2019

I don't know the rules here so I am not sure bin begging is allowed, lol

Here ya go, should be a decent start.

**Andy61vette** · 03-25-2019

Originally Posted by In-Tech

I don't know the rules here so I am not sure bin begging is allowed, lol

Here ya go, should be a decent start.

Im not normally a begger lol. I appreciate it. Like i said im in a time crunch. Ive got 1 weekend to get a car to a cruise

**In-Tech** · 03-25-2019

I've been doing this since the 90's and I sorta remember at some of the sites there was some kinda rule about asking for non stock bin files and since I am fairly new to this great site I just don't want to upset the powers that be so if I did, I apologize. I hope the file I posted gets you close. Nowadays I only seem to get 3-4 "chip" projects a year and that one is from quite a few years ago but from memory it was a fairly stock 350 with the LT4 cam. I didn't open the file to check what injectors it was tuned for so make sure it matches what you have or adjust accordingly. Good luck and if you don't mind, let me/us know how it goes.
-Carl

**Andy61vette** · 03-25-2019

Will do. Thanks again.

**1project2many** · 03-25-2019

Originally Posted by In-Tech

I've been doing this since the 90's and I sorta remember at some of the sites there was some kinda rule about asking for non stock bin files and since I am fairly new to this great site I just don't want to upset the powers that be so if I did, I apologize. I hope the file I posted gets you close. Nowadays I only seem to get 3-4 "chip" projects a year and that one is from quite a few years ago but from memory it was a fairly stock 350 with the LT4 cam. I didn't open the file to check what injectors it was tuned for so make sure it matches what you have or adjust accordingly. Good luck and if you don't mind, let me/us know how it goes.
-Carl

Hi Carl,

Thanks for posting that. You and I were on one of those early boards together. I can remember how bent out of shape members were at times. Back then tuning software was hard to get, each location in a .bin was treated like Blackbeard's treasure, and egos got out of hand pretty quickly. We really don't have much of that here. The biggest issue I can remember is when a disassembly and matching definition were posted that a pro-tuner claimed was his own. Those files were removed because the poster couldn't provide backup documentation. Anyone who's worked on a disassembly will have notes, files, something. So, thanks for posting that file. :)

Shannen