T42 Bench Flash Tool - 120 ohm Termination

[NISANDA]

That good to know.

Would you be willing to share the wiring diagram of your T42 bench tool?

dave w

Yes, the pins are:
Pin 31 - Ign Voltage (Switch)
Pin 32 - Battery Voltage (Constant)
Pin 49 - Ground (Big Black-white wire)
Pin 37 - CAN -
Pin 38 - CAN +

Works very good read all v8,v6 and 4 cil ecotec transmisions no problem.
And it does read with Vin and vehicle info with tunercats.