Results 1 to 9 of 9

Thread: 350 TBI - increasing idle setting for AC Switch?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected! Mrgto68's Avatar
    Join Date
    Dec 2018
    Posts
    48

    350 TBI - increasing idle setting for AC Switch?

    I'm looking for a way to manually increase the idle setting of my 350 tbi.

    Installed a new engine harness, removed all electronics not necessary to the operation of the motor. One option I'm looking at is the AC switch. Throwing the AC to ecu wire on a toggle switch when toggled on it throes the signal to the ecu. Is it possible to program the chip to increase the "AC" idle to let's say 950 rpm's?

    Thanks

  2. #2

  3. #3
    Fuel Injected! Mrgto68's Avatar
    Join Date
    Dec 2018
    Posts
    48
    Quote Originally Posted by steveo View Post
    probably possible but we need to know what ECM/mask you're using each time you ask questions like this

    ahhh my bad, I thought had uploaded the photo. .

    AHWZ 7639

    20190217_114932.jpg

  4. #4
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    The ecm is the 1227747.
    The mask is $42.
    The BCC is AHWZ.


    Is it possible to program the chip to increase the "AC" idle to let's say 950 rpm's?
    Yes, it's possible to program the ecm to increase idle speed if it appears the A/C is engaged.

  5. #5
    Fuel Injected! Mrgto68's Avatar
    Join Date
    Dec 2018
    Posts
    48
    Quote Originally Posted by 1project2many View Post
    The ecm is the 1227747.
    The mask is $42.
    The BCC is AHWZ.

    Yes, it's possible to program the ecm to increase idle speed if it appears the A/C is engaged.
    This is good news! What would be the easiest and most affordable way to accomplish this? I'm an old Carburetor Wrencher, I was able to figure out how to install TunerPro RT and get the ecu to throw live data to my laptop, this is new territory for me.

    thanks again!

    -Mike

  6. #6
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    The easiest way is to pay someone else.

    Affordable will depend on how many additional changes you may want as time passes. If you invest in the tools then you can make your own changes whenever you'd like.

Similar Threads

  1. Setting Base Idle using tunerpro 1227730 ecm.
    By tommylee11491 in forum GM EFI Systems
    Replies: 3
    Last Post: 04-02-2017, 10:38 AM
  2. Replies: 3
    Last Post: 09-06-2016, 05:06 PM
  3. VE table changes (increasing size)
    By beestoys in forum GM EFI Systems
    Replies: 23
    Last Post: 02-21-2014, 09:25 PM
  4. Increasing TBI fuel pressure
    By mmigacz in forum GM EFI Systems
    Replies: 5
    Last Post: 11-29-2013, 02:57 AM
  5. Setting up my TBI
    By 1great40 in forum GM EFI Systems
    Replies: 23
    Last Post: 04-19-2013, 04:46 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •