I have been frantically reading through Jimmie's post about his 94 chevy pickup and trying to learn from his conversations. my lord there is so much information on here to soak in!
I have been frantically reading through Jimmie's post about his 94 chevy pickup and trying to learn from his conversations. my lord there is so much information on here to soak in!
Yes, they can be flashed 1,000s of times and retain memory for 100 years according to literature I've read. I bought 5 on Ebay for $25 and have been tuning my truck with them for a while. Just be careful of Chinese "fake" chips...Dave, now I can see all of the information!!! so the XDF file that I downloaded from the CODE59 website didn't like it?? the XDF file lets tunerpro read the information in the bins, what does the ADX file do?
another question, are the 27sf512 chips re-writable? or is it once and done?
http://support.moates.net/fake-27sf512-chips/
Ahhh...are those advertised...should known it was a roller grind. Fast355 would chime in saying that cam is not huge at all!!!
Post 1 you said you figured out how to datalog...adx is used with TPRTs datalogger.
Start with the stickie if you havent... http://www.gearhead-efi.com/Fuel-Inj...to-New-and-Old
Last edited by stew86MCSS396; 02-28-2019 at 08:25 AM. Reason: dyslexic
The .xdf is similar to Make / Model / Year / Engine / Transmission.
The 27SF512 is re-writeable
dave w
Thanks all for the info and thanks Dave for those BIN files. I had to bsck tbe timing tables down from 48 degrees!!!! Haha it was PING CITY during the first test. I pulled the timing back to a max of 34 degrees and WOW!!! It still goes lean when i crack the throttle for just a second, so i need to play with the fuel tables a bit. What do you think i should have my fuel pressure set at? I’m at 16 psi now, i do not have a wide band O2 sensor. I’m just going off of the millivolts from the stock O2 sensor and at first throttle crack it drops to less than 100mv then once it comes out of it’s stumble it goes to 7~800 mv. What table should i change the fueling in? The Timing was obvious, the fuel i’m not sure on...
thanks for the help!
Bobby
You can give it a quick shot of fuel in the AE-TPS PW(Acceleration Enrichment) and the AE-MAP PW for a longer shot.I’m just going off of the millivolts from the stock O2 sensor and at first throttle crack it drops to less than 100mv then once it comes out of it’s stumble it goes to 7~800 mv. What table should i change the fueling in? The Timing was obvious, the fuel i’m not sure on...
Last edited by PlayingWithTBI; 03-02-2019 at 05:06 AM. Reason: attach picks
Thanks, i’ll give those a try, i fugured there was a certain table for thst, just wasn’t sure wich. There are soooooooo many terms and abbreviations to learn.
Yep, that's why IMHO this is the best forum for tuning and troubleshooting. Here's some definitions from the forum front page...
http://www.gearhead-efi.com/gm-ecm-p...ictionary.html
Fantastic! Thank you! There is so much awesome info on this page! I have been slugging this thing along for 6 months because i was intimidated by all of this tune talk.. i was ready to give up until i found this page!
Jump in, get your feet wet!!!
Bookmarks