I'm trying to find out what tables or scalars affect AFR when the engine is cold.

I have PCM 16197427 with bin BJYL and mask OE ( I think I got all those words right). It runs rich when cold, very rich, like 8.0, fogging unburned gas out the tailpipes. Seems to stay rich even when in closed loop until it warms up, like a minute later at least. The AFR will slowly increase once it starts to warm up. Even in closed loop, when it's cooler outside my BLMs are 121 ish, and when it gets hotter they are like 133 ish, so I don't know if it's purely a open loop thing or not.

I can't find a table for temperature vs AFR
There is a section for Choke Part to Drive AFR Parameters, but I don't think that affects it.
I have been searching and read about "Choke- Time Out AFR vs. Coolant Temp" in another thread, but my mask doesn't seem to have that.
I found some stuff for cranking and cold start, but I don't know how long after start that would affect anything.