Results 1 to 8 of 8

Thread: Looking for PCM recommendations

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-18-2019 #1
    TNoutdoorsman
    TNoutdoorsman is offline
    Fuel Injected!
    Join Date
    Sep 2018
    Posts
    43

    Looking for PCM recommendations

    I am finalizing the parts choices on my engine swap. Working on a 1989 K5 Blazer 4x4 w/ 4.56 gears and 35s. Currently has a TBI 350/700R4 in it

    I just snagged a Vortec 383 and have an older Edelbrock Vortec MPFI system and a Holley 670 throttle body.

    I can either use my existing ECM and get someone to burn my ships and hope for the best or I may try to swap a harness and PCM out of a later vehicle like and Express van with a Vortec then I can learn my own programming.

    I'd like to swap but am having a hard time finding a harness and PCM from a 0411 equipped van.

    I did find a 494 and harness from a 2000 5.7 van

    I could use another setup but want to be able to tune myself.

    Recommendations?
    Last edited by TNoutdoorsman; 01-18-2019 at 01:54 AM.
    Reply With Quote Reply With Quote
« Gathering parts for the future, how does this combo look? | Optispark rotor tip painted? »

Similar Threads

  1. Fuel Pump Recommendations
    By dktool in forum GM EFI Systems
    Replies: 2
    Last Post: 05-23-2018, 09:21 PM
  2. Block recommendations plz
    By Stokes1114 in forum Gear Heads
    Replies: 10
    Last Post: 09-17-2017, 05:28 AM
  3. recommendations? 7747 help
    By Zefyr in forum GM EFI Systems
    Replies: 33
    Last Post: 02-11-2015, 01:30 PM
  4. 383 cam recommendations
    By satinblack91 in forum GM EFI Systems
    Replies: 15
    Last Post: 04-22-2014, 10:18 PM
  5. Fuel pump recommendations
    By satinblack91 in forum Gear Heads
    Replies: 0
    Last Post: 01-23-2014, 05:19 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules