Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Page 2 of 2 FirstFirst 12
Results 16 to 24 of 24

Thread: Free LS1 Tuning Software (all you need is TunerPro)

  1. #16
    Fuel Injected!
    Join Date
    Jun 2014
    Posts
    168
    Hello Antus,

    My apologies for the delay in response - I don’t get to the internet some days (LOL).

    I checked your zip file - there is only one DLL in there. I have setup the XDF for two separate DLL files - one named “512Kb PCM OS Checksum Plugin” and the other named “1Mb PCM OS Checksum Plugin”.

    Could you setup your checksum plugin like that please ?

    Redoing all of the XDFs is not a task that I wish to undertake.

  2. #17
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    51
    I can do that - I would be happy to fix them up and send them back if your open to that. I think 1 plugin is better than 2 or more (if or when we develop more stuff in the future). Otherwise I'd need to use the same GUIDs at the hacked one too, which I guess is possible but I'd rather not base my work on the direction the hack was going. Contact me by PM and we can decide and do something out of this thread.

  3. #18
    Fuel Injected!
    Join Date
    Jan 2018
    Posts
    22
    LRT, did you also make the custom operating systems? Where can we get the bin files for those?

    Thanks for all of your hard work!

  4. #19
    Fuel Injected! CDeeZ's Avatar
    Join Date
    May 2012
    Location
    Jokelahoma
    Posts
    422
    NSFW, LRT, PeteS, antus and EVERYONE else who is working to make this happen in any capacity...... Thank you all! You guys embody the spirit of hot-rodding by making this accessible to everyone.
    Last edited by CDeeZ; 01-24-2019 at 05:40 PM.

  5. #20
    Carb and Points!
    Join Date
    Dec 2018
    Age
    35
    Posts
    2
    Quote Originally Posted by LRT View Post
    Regarding PCM Service Numbers ...

    Sometimes people use abbreviations for these, rather than the complete service number.

    4896 = Service Number 09354896
    0411 = Service Number 12200411
    Thank you LRT! Also would your XDF work with my 09354896 ECU? I have downloaded my bin file and when I open it in tuner pro, the values are not right. I used the 512 checksum and the 12202088 XDF.

  6. #21
    Carb and Points!
    Join Date
    Jan 2019
    Posts
    2
    Hi guys - I`m cross posting from the corvette forum here.

    I ordered the AllPro USB ELM327 adaptor and have been able to read my BIN file successfully, 01Z06 with mods and a tune. Great! I think, going via the other thread that I can also write the cal changes I want, even better.

    However the final piece needed is data logging. Can anyone help? I found a few LS1 tagged ADX files but none of them get anything in TunerPro from my car.

    I set tunerpro to use plug-in, set plug-in to ELM327OBDII interface.

    1 of the ADX files lets me connect ok but rate is ~1Hz and i'm not getting any channels coming back. 2 of the ADX files let me connect but with rolling errors and no data. The other files don't even get me connected....

  7. #22
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    51
    The built in plugin, as far as i can tell doesnt do anything. I use scalxl pro at this stage as ive had a license for it for years. But I do have a working elm327 adx, but a quick test this morning shows it needs some fixes to work on the allpro. If you want to help and understand the elm protocol and adx authorship i'll send it, else give me a few days and i'll see if i can get it going and release it.

  8. #23
    Carb and Points!
    Join Date
    Jan 2019
    Posts
    2
    Quote Originally Posted by antus View Post
    The built in plugin, as far as i can tell doesnt do anything. I use scalxl pro at this stage as ive had a license for it for years. But I do have a working elm327 adx, but a quick test this morning shows it needs some fixes to work on the allpro. If you want to help and understand the elm protocol and adx authorship i'll send it, else give me a few days and i'll see if i can get it going and release it.
    Would be interested in the protocol but I don't expect that I can fix anything!!!!! PM'd.

  9. #24
    Carb and Points!
    Join Date
    Feb 2019
    Age
    46
    Posts
    1
    Hi LRT thanks for the amazing work. My question is, as I am trying to enable data tracing using tuner pro, are your xdf files already set up to work with an adx file? I only ask as the guide I have tried to use mentions having to edit the xdf to suit the tracing and yours are password protected so don't allow the option to do so. Or if I am barking up the wrong tree just go ahead and slap me down. I am a noob to all this tuning stuff. Cheers.

Similar Threads

  1. Opinions on OBDII auto tuning software
    By scuzz in forum OBDII Tuning
    Replies: 9
    Last Post: 07-16-2016, 08:23 PM
  2. Learning a new ECU and tuning software
    By Xnke in forum Introductions
    Replies: 0
    Last Post: 06-24-2015, 12:02 PM
  3. sale on tgo for laptop and tuning software.
    By one92rs in forum Buy - Sell - Trade - Wanted
    Replies: 1
    Last Post: 04-25-2013, 08:28 AM
  4. Long Starting with EBL Flash and TunerPro software
    By beast94 in forum GM EFI Systems
    Replies: 18
    Last Post: 06-02-2012, 05:28 PM
  5. Nissan Tuning software and Hardware.
    By Six_Shooter in forum Other EFI systems and related topics
    Replies: 0
    Last Post: 10-24-2011, 09:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •