Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19

Thread: Injectors pulsing when engine is OFF?!

  1. #16
    Fuel Injected! CDeeZ's Avatar
    Join Date
    May 2012
    Location
    Jokelahoma
    Posts
    422
    Good point, I need to look over the 4 injector wires.

  2. #17
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    Aftermarket ignition module?
    Throttle cable physically moving another wire?

    Does scantool data show AE active flag? It may be possible to insert custom code to light the C/E light if ECM activates AE. That might help isolate if the problem is ecm triggering injectors or another issue.

  3. #18
    Fuel Injected! brian617's Avatar
    Join Date
    Apr 2013
    Location
    Arkansas
    Age
    45
    Posts
    711
    Is/was your MAP issue causing AE to pulse the injectors?
    89 K1500 Scottsdale 5.7L 5spd 3:42 RamJet cam Dart iron TBI heads 427 PCM swap
    95 C2500 Cheyenne 6.5L turbo diesel 4L80e 4:10 DB2-4911 Manual pump conversion 0411 PCM trans control 2Bar COS
    05 Outback XT 2.5L turbo gas auto

  4. #19
    Fuel Injected! CDeeZ's Avatar
    Join Date
    May 2012
    Location
    Jokelahoma
    Posts
    422
    Quote Originally Posted by 1project2many View Post
    Aftermarket ignition module?
    Throttle cable physically moving another wire?

    Does scantool data show AE active flag? It may be possible to insert custom code to light the C/E light if ECM activates AE. That might help isolate if the problem is ecm triggering injectors or another issue.
    The ignition module is aftermarket. The whole distributor is. The original GM distributor was so worn out you could literally grab the rotor bug shaft and wobble the entire shaft around. I turned that distributor into an oil pump priming tool. I think it's a Pertronix distributor that I stabbed in there with it's corresponding module.

    What do you mean by the cable moving another wire, I don't follow ya there?

    Unfortunately I haven't had the laptop hooked up and running TP when this issue has happened. IF it does come back I will capture it on a datalog though. Should help alot. Don't know why I hadn't captured that on a datalog already other than just being overwhelmed by every little nitpicking issue that has popped up on this build. But then, I guess that is to be expected when ironing out the bugs on such an ambitious build.


    Quote Originally Posted by brian617 View Post
    Is/was your MAP issue causing AE to pulse the injectors?
    I don't know. That is a very good question though..... I wouldn't be surprised if it was..... It was weird, the MAP would work fine sometimes, then other times it was locked in the middle KPA colum of 55 or whatever it is.... Must have chased my tail for MONTHS before I finally figured out that the MAP was flaking out sometimes.

Similar Threads

  1. 7747 TCC Signal Pulsing-700r4 Converter Will Not Lock
    By Opas69 in forum GM EFI Systems
    Replies: 1
    Last Post: 07-06-2018, 07:37 PM
  2. AE pulsing in DFCO
    By JeepsAndGuns in forum GM EFI Systems
    Replies: 11
    Last Post: 02-24-2014, 03:26 AM
  3. Injectors not pulsing...
    By mytmouz in forum GM EFI Systems
    Replies: 9
    Last Post: 01-06-2014, 10:43 AM
  4. Engine Dyno ? Fast 102 Intake MAF and 36 lb injectors
    By EagleMark in forum OBDII Tuning
    Replies: 27
    Last Post: 11-19-2013, 10:30 AM
  5. Replies: 8
    Last Post: 04-26-2012, 06:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •