Quote Originally Posted by dhworkin View Post
I'm going to install a areomotive 13301 regulator. What I understand is that you block off the reg on the TB, flow is from pump to 13301 and out to fuel inlet on TB, run return line from 13301 to tank. What happens to the return line at TB, does it get plugged?
On ebay somebody makes a nice chromed block off plate for the tbi. Comes woth plate, screws and gasket. I think i paid somewhere between 10-20 bucks for it. Works perfect. And i bought a cheap aeromotive knockoff off ebay and put a aeromotive diaphragm in it. With it after the return line. All AN lines. Works flawlessly. Im running about 35 PSI of FP.