Results 1 to 15 of 71

Thread: '87 350 TBI, custom application, looking to go bare-bones

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-16-2019 #13
    S.O.B.B.
    S.O.B.B. is offline
    Fuel Injected! S.O.B.B.'s Avatar
    Join Date
    Nov 2017
    Location
    Ontario Canada
    Posts
    167
    The 3 wire egr plug is for evrv.2 wire egr plug is egr solenoid.
    Pin A4 says egr.grey wire.
    The 3 wire for evrv is the same 2 wires as in the 2 wire egr solenoid plug.the 3rd wire is a ground.hth
    1227747--1.jpg
    20180906_215946.png
    Last edited by S.O.B.B.; 02-16-2019 at 08:09 AM.
    Jeeper
    87 sjimmy powered by a 92 cadillac 4.9L pfi on 7427pcm /700r4/ 8.8 3.55 rear/disc brakes.
    Reply With Quote Reply With Quote
« bin file for lt4 hot cam in tpi. 1227730 pcm 700r4 trans. | $0D 16107427 CL Rich BLM cold = Lean BLM hot »

Similar Threads

  1. Need some advice on a OEM ecu for non stock (OEM) application.
    By dfarr67 in forum GM EFI Systems
    Replies: 14
    Last Post: 01-16-2018, 01:05 AM
  2. carb to TBI converions, Marine application
    By keaton in forum GM EFI Systems
    Replies: 14
    Last Post: 07-22-2017, 02:28 AM
  3. A totally different TP application (bin attached)
    By 1BadAction in forum TunerPro Tuning Talk
    Replies: 17
    Last Post: 11-13-2015, 07:50 PM
  4. BCC Usage/Application?
    By kevinvinv in forum GM EFI Systems
    Replies: 5
    Last Post: 09-08-2014, 02:12 PM
  5. Custom ADX
    By buddrow in forum TunerPro Tuning Talk
    Replies: 3
    Last Post: 06-30-2014, 09:09 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules