Results 1 to 5 of 5

Thread: 1996 corvette bin files needed

  1. #1
    Carb and Points!
    Join Date
    Apr 2018
    Age
    58
    Posts
    6

    1996 corvette bin files needed

    Ive soldered in sockets but need the bin files. I found set on here but the car wouldnt start so would like to know if someone has a set or where I could find them. Can I get them from GM's site somehow?

  2. #2
    Fuel Injected! Terminal_Crazy's Avatar
    Join Date
    Oct 2015
    Location
    Lancashire England
    Posts
    410
    Hi
    I'm certain you'll need to flash the roms with an image first before you can connect through the PCM.

    The images seem to be scrambled a little... I guess the address / data pins are swapped over to make things difficult to view.
    I never did figure out how / where.

    I do have stock 1995 T & E side Flash Rom Images.
    I have others I think but these work on a 16188051 LT1 PCM.

    email me - TerminalCrazy at sand-hill.uk and i'll post them over

    Mitch
    '95 Z28 M6 -Just the odd mod.
    '80 350 A3 C3 Corvette - recent addition.

  3. #3
    Carb and Points!
    Join Date
    Apr 2018
    Age
    58
    Posts
    6
    Sent email and willing to try 95 but mine is a 96 OBDII.. but if I can boot and communicate maybe I can send m jet DST tune to it and make it work.

  4. #4
    Fuel Injected! Terminal_Crazy's Avatar
    Join Date
    Oct 2015
    Location
    Lancashire England
    Posts
    410
    appologies, that should have been Terminal_Crazy at sand-hill.uk
    '95 Z28 M6 -Just the odd mod.
    '80 350 A3 C3 Corvette - recent addition.

  5. #5
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,469
    You can contact tunercat and ask for the raw bin files for 96-97 PCM.

    When you recover the PCM can you please read the raw bins and post them here with a picture of the chips used. It will be good to have them available if needed.

Similar Threads

  1. 1996 TunerCat Calibration Files
    By EagleMark in forum TunerCat Calibration Files
    Replies: 9
    Last Post: 09-16-2019, 07:35 PM
  2. 1996 TunerPro Bin Files
    By EagleMark in forum TunerPro OBDII Bin Files
    Replies: 3
    Last Post: 06-05-2018, 07:20 AM
  3. 93 corvette experiance needed..
    By Axman in forum GM EFI Systems
    Replies: 7
    Last Post: 05-05-2016, 07:32 AM
  4. 2009 Corvette ls3 cal needed
    By MYLTWON in forum TunerCat OBDII
    Replies: 4
    Last Post: 10-20-2013, 04:45 PM
  5. Replies: 14
    Last Post: 11-16-2011, 07:08 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •