Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 11 of 11

Thread: win aldl

  1. #1
    Electronic Ignition!
    Join Date
    Nov 2018
    Posts
    10

    win aldl

    Hello. I have a 1991 GMC K1500 pickup that is not running right after a new installation. Would you be able to look at the data and provide some advice?. If not, perhaps you could refer me to someone who can. I am currently using the win aldl set up. Everything looks ok to me, but I am a long ways from being an expert. Any advice would be great. Thanks.

    Owl.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    4,052
    WinALDL was awesome in it's day. I consider WinALDL obsolete. TunerPro RT has eclipsed WinALDL with more information and better graphics, see attached screen shots.

    dave w

    TunerPro RT Dash.jpg

    TunerPro RT BLM History (Fuel).jpg

    TunerPro RT Monitors.jpg

    TunerPro RT Spark Advance.jpg

    TunerPro RT Item Lists.jpg

  3. #3
    Electronic Ignition!
    Join Date
    Nov 2018
    Posts
    10
    Thanks for the reply. I have downloaded tuner pro but have yet to figure out how to get started. I definitely would like to see more detail. Being an older truck I have changed or replaced just about everything over the years, so I'm reluctant to do anything. I will spend more time with tuner pro this week and hopefully get the program started. Thanks Again.

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    4,052
    What is the computer part number in the 91 GMC 1500?

    dave w

  5. #5
    Electronic Ignition!
    Join Date
    Nov 2018
    Posts
    10
    I do not know the four letter code off hand, but the number I have been using for logs is 1227747.
    Owl

  6. #6
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    4,052
    TunerPro information (.xdf & .adx files) for the 1227747: http://www.gearhead-efi.com/Fuel-Inj...Information-42

    dave w

  7. #7
    Electronic Ignition!
    Join Date
    Nov 2018
    Posts
    10
    Thanks for the help Dave, I will get started this weekend.
    Owl

  8. #8
    Electronic Ignition!
    Join Date
    Nov 2018
    Posts
    10
    I'm having a little trouble with the basic set up for Tuner Pro RT. For now I am only looking at gathering data from the ECM for analysis. Two basic questions. 1) should the file be .adx or .ads, or is one a sub category of the other?. 2) how would I know if I downloaded the correct file?. At present I can connect the cable; it show's connected, but the fields listed will not populate with data. Any advice or help would be greatly appreciated.
    Owl

  9. #9
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    4,052
    Maybe search YouTube for TunerPro RT help: https://www.youtube.com/playlist?lis...721B5634A4EC45

    dave w

  10. #10
    Fuel Injected!
    Join Date
    Dec 2012
    Location
    Naches, WA
    Age
    72
    Posts
    54
    Quote Originally Posted by Owl View Post
    I'm having a little trouble with the basic set up for Tuner Pro RT. For now I am only looking at gathering data from the ECM for analysis. Two basic questions. 1) should the file be .adx or .ads, or is one a sub category of the other?.
    Owl
    Tunerpro V4 uses ADS files whereas TP V5 uses ADX files.

  11. #11
    Electronic Ignition!
    Join Date
    Nov 2018
    Posts
    10
    Thanks for the advice. I will check to make sure I am using the lasted version. There is also two locations on the Tuner Pro web site with OBD 1 files. I think this confused me. Thanks again.
    Owl

Similar Threads

  1. ALDL bad/no signal
    By trickster555 in forum GM EFI Systems
    Replies: 1
    Last Post: 05-09-2016, 04:42 PM
  2. ALDL modes
    By steveo in forum GM EFI Systems
    Replies: 3
    Last Post: 11-11-2015, 07:25 PM
  3. My aldl does not look right!
    By scottyd in forum GM EFI Systems
    Replies: 3
    Last Post: 12-16-2014, 05:08 PM
  4. ALDL wiring...
    By mytmouz in forum GM EFI Systems
    Replies: 2
    Last Post: 06-23-2013, 04:50 PM
  5. USB/ALDL cable
    By Cricket_crawler in forum TunerPro Tuning Talk
    Replies: 1
    Last Post: 04-15-2013, 10:45 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •