Results 1 to 9 of 9

Thread: TBI Engine Parts and Tuning Equipment

  1. #1
    Fuel Injected!
    Join Date
    Feb 2015
    Location
    Ogden, UT
    Age
    40
    Posts
    139

    TBI Engine Parts and Tuning Equipment

    Hey all,

    I have converted my truck to a Fitech setup, so I don't need the TBI system or tuning equipment anymore. All prices are OBO also. I'll get some pictures of everything later.

    Edelbrock 3704 intake manifold (It came on the Blueprint crate engine I put in the truck, but was removed when converting to Fitech.) - $150

    350 TBI intake manifold (Throttle bores opened to 2" diameter and intake runners smoothed and gasket matched, ready for a big block throttle body) - $100

    Big Block Throttle Body w/ 1" spacer and small block sensor/IAC adapters (Later style TB with larger IAC passages, spacer needed to seal bottom of TB because normal TB footprint on intake is different, I have a few sets of injectors I would sell also) - $150

    16197427 ECM (Memcal included, swapped to this from a 1228747, works perfectly) - SOLD

    Moates Autoprom APU-1 and Moates G1-style EEPROM adapter (Fully functional, memcal adapter has switch and header for bin stacking in eeprom) - SOLD

    AEM UEGO X-Series Wideband Oxygen Gauge and Sensor (Barely used, sensor has maybe 30 min of runtime, comes with gauge cup for mounting) - SOLD
    Last edited by Chewy1576; 02-07-2019 at 08:37 PM.
    1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10

  2. #2
    Fuel Injected!
    Join Date
    Dec 2016
    Location
    Colorado
    Age
    39
    Posts
    120
    Do you know the model# of the wideband?

  3. #3
    Fuel Injected!
    Join Date
    Feb 2015
    Location
    Ogden, UT
    Age
    40
    Posts
    139
    It’s a 30-0300. I had to use one of the analog inputs on the Autoprom to get data from it.
    Last edited by Chewy1576; 11-21-2018 at 06:06 AM.
    1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10

  4. #4
    Fuel Injected!
    Join Date
    Dec 2016
    Location
    Colorado
    Age
    39
    Posts
    120
    Did you try the egr pin? That's the new x series I believe. If so I want it. I can send payment to you by Friday if that will work? PayPal? Does it have the gauge?
    Last edited by Stokes1114; 11-21-2018 at 10:36 PM.

  5. #5
    Fuel Injected!
    Join Date
    Feb 2015
    Location
    Ogden, UT
    Age
    40
    Posts
    139
    Here are a few pics.
    Attached Images Attached Images
    1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10

  6. #6
    Fuel Injected!
    Join Date
    Feb 2015
    Location
    Ogden, UT
    Age
    40
    Posts
    139
    I did not try it on the EGR pin, I used one of the analog input channels on the APU1.
    1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10

  7. #7
    Fuel Injected!
    Join Date
    Dec 2016
    Location
    Colorado
    Age
    39
    Posts
    120
    I'll take it. I can send money first thing Friday... Or even tomorrow if needed. Pm your PayPal

  8. #8
    Fuel Injected!
    Join Date
    Feb 2015
    Location
    Ogden, UT
    Age
    40
    Posts
    139
    Wideband gauge and Edelbrock 3704 manifold SOLD!
    1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10

  9. #9
    Fuel Injected!
    Join Date
    Feb 2015
    Location
    Ogden, UT
    Age
    40
    Posts
    139
    ECM and Moates equipment sold.
    1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10

Similar Threads

  1. Looking for used equipment
    By old truck guy in forum Buy - Sell - Trade - Wanted
    Replies: 4
    Last Post: 03-29-2015, 07:27 AM
  2. Used Moates tuning equipment identification
    By zildjian4life218 in forum Other EFI systems and related topics
    Replies: 2
    Last Post: 01-18-2015, 05:58 PM
  3. Tuning Equipment - Laptops!
    By EagleMark in forum Gear Heads
    Replies: 63
    Last Post: 07-02-2014, 04:41 AM
  4. Replies: 5
    Last Post: 12-28-2013, 08:57 PM
  5. Equipment needed for tuning
    By Xenon in forum Gear Heads
    Replies: 13
    Last Post: 03-20-2012, 07:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •