Results 1 to 3 of 3

Thread: micropack and 100w sealed micropack ECM connector part numbers

  1. #1
    Fuel Injected! vilefly's Avatar
    Join Date
    Sep 2017
    Age
    53
    Posts
    217

    micropack and 100w sealed micropack ECM connector part numbers

    I did some digging to see if I could find some obsolete pcm connectors and found that www.mouser.com and www.jameco.com tend to keep some, but not all in stock. They are much cheaper from these sources, but have to ordered piece by piece, so I figured a diagram with part numbers would help.

    The name of the manufacturer has changed over the years. Delco has become Delphi, which has now become Aptiv.

    The Micropack connectors are for the P4 GM ECMs.
    pcm connector diagram.jpg
    The 100W sealed Micropack are for the finned PCMs with the aluminum body. Like this picture shows:
    pcm connector ID.png

    Here is the PDF file with the diagrams, part numbers, and mating parts.
    http://www.powerandsignal.com/docs/Catalog/Micro_Pack_Series_Section.pdf

    Hope this helps, since replacement connectors are priced far too high, even on ebay.

    In some cases, you may have to order the wrong connector end piece, and grind off the locating rib on it to make it fit.

    Last edited by vilefly; 11-19-2018 at 04:24 AM.

  2. #2
    Fuel Injected!
    Join Date
    Jun 2015
    Age
    36
    Posts
    354
    Try Corsa Technic for pins, and EFIHardware for the finned aluminum body connectors. Of course, EFIHardware has the pins too.

  3. #3
    Fuel Injected! vilefly's Avatar
    Join Date
    Sep 2017
    Age
    53
    Posts
    217
    They seem to be nice suppliers for everything except the 100w sealed weatherpack connectors, but they are a useful supplier nonetheless.

Similar Threads

  1. GM TBI Injector size, color and part numbers
    By EagleMark in forum GM EFI Systems
    Replies: 32
    Last Post: 06-05-2023, 03:42 PM
  2. Newer PCM terminal part numbers
    By phonedawgz in forum OBDII Tuning
    Replies: 3
    Last Post: 11-25-2014, 03:02 PM
  3. QUESTION RE: NUMBERS IN TABLE CELLS
    By terpngator in forum TunerPro Tuning Talk
    Replies: 15
    Last Post: 10-15-2014, 03:19 AM
  4. Performance Numbers
    By BLG355 in forum Gear Heads
    Replies: 5
    Last Post: 07-02-2014, 01:46 AM
  5. And yet another question about blm numbers.
    By damanx in forum GM EFI Systems
    Replies: 3
    Last Post: 02-22-2014, 11:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •