95 lt1 injector offset questions

[spfautsch]

Mitch I'm beginning to think a lot of your difficulties are related to low pulsewidth mismatch and / or inconsistency.

My suggestion to you would be to go here and read everything.

Then go here and read everything.

I contacted Greg Banish last night to see if he would be willing to do full flow testing and he suggested it's not worth the expense and that I look for a set of LS3 / LS7 injectors and run them at 4 bar.

I'd like to give FIC the benefit of the doubt because as I've mentioned I'm not horribly disappointed with the low flow fueling with these current injectors. But I'm relatively sure we'd all be time + money ahead to leave modified injectors alone unless all we're interested in is accurate PE fueling.