95 lt1 injector offset questions

[johnny_b]

If the spread between the cells[on both rpm and map vectors] is not optimal and polished it can result in constant oscillations back and forth.
The best practice is to keep constant rpm and map 2000 and 40 for example and tune with wideband.
Very hard to achieve on the road though.

The same can be said about tuning the VE table.

From a controls and numerical methods perspective, once you achieve a converging amount of oscillation variance for changing your VE table, you could then apply the same method to tuning PW vs. Load table until converging amounts of oscillation variance is achieved in the data. this would in theory be the optimal setting