amc 304 conversion

[babywag]

@Dave w

"Masks are similar to Year / Make / Model / Engine / Transmission." Do youhave more info about that?

I found V8 mod.jpg somewhere here in the forum and saved the picture. Now I wanted to have a look to it but the picture has only 3 kb and is too small. May you publish it here again or give me the link where it was.Do you have more info about modifying the memcal. I still have the old eeprom BJBB engine runs but cuts off at a certain rpm ( have to connect a rpm-meter)
mecanicus

Remove the EEPROM and solder in a flash chip to the memcal.
A Burn2 from moates + cheap adapter will then allow you to read/flash the memcal. TunerPro used to datalog and modify .bin as needed/desired.
This would be your lowest cost tuning option.

[mecanicus]

Thanks for the answers. In the meanwhile i ordered a memcal with BPSA.bin, this should be for a 5,7 manual shift 8 cyl engine.It should arive next few days. As well I could manage to get on the PCM with tunerprort. None of the other free programms connected to the pcm. As well I have XGpro 866II Programmer and a spare sst27 eeprom so I can try other bins too.At the moment I'm working on the fueltank to implement the according fuelpunp.I will report when its ready.