Results 1 to 8 of 8

Thread: need help creating idle history tables!!!

  1. #1
    Fuel Injected!
    Join Date
    Jun 2015
    Posts
    130

    need help creating idle history tables!!!

    I cannot figure out how to create idle blm history tables! Ultimately, I'd like to only use data when idle timer is activated and using idle ve table. is that possible? I can't figure out how to construct the argument to make that happen. i bricked and had to wipe and reinstall tp once already trying....
    Ron

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    What definition are you working with?

    $OD, $OE, $E6, & $31 have idle flag in the exported .csv file.

    dave w

  3. #3
    Fuel Injected!
    Join Date
    Jun 2015
    Posts
    130
    Hi Dave,
    $A1 is the code mask I'm working with.
    Ron

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Hi Ron,
    I have not worked with $A1. Maybe you can post a $A1 .csv file I can look at?

    dave w

  5. #5
    Fuel Injected!
    Join Date
    Jun 2015
    Posts
    130
    Quote Originally Posted by dave w View Post
    Hi Ron,
    I have not worked with $A1. Maybe you can post a $A1 .csv file I can look at?

    dave w
    Hi Dave,
    Here's the $A1 files and a log too, in order to see how the idle works. $A1 seems to use both speed density and alpa-N both, blended at some point, but I can't figure out where. My thought process is that, short of completely blanking out main ve, I could defign a table that only picked up idle activities.
    Any help is MUCH appreciated! I'm in too far anf can't see the forest through the trees.
    Ron
    Attached Files Attached Files
    Last edited by f85gtron; 10-28-2018 at 03:32 PM. Reason: added csv file

  6. #6
    Fuel Injected!
    Join Date
    Jun 2015
    Posts
    130
    the site won't allow csv uploads. hmmm?
    hopefully you can pull what you need from the log and other defs.
    Ron

  7. #7
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    I exported the .csv from the .xdl, thank you for posting the .adx file.

    The attached .zip has an excel spreadsheet with the TPS and MPH sorted, assuming 0% TPS and 0 MPH = Idle.

    I was not able to "crunch" the data, hopefully the attached excel spreadsheet will help you.

    dave w
    Attached Files Attached Files

  8. #8
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Based on the spreadsheet posted, the Idle Averages (TPS% = 0% and MPH = 0) are listed below:
    Tach = 900 RPM
    MAP = 40.9 KPa (fair, 35 KPa would be better)
    Spark Advance = 25.4 degrees (seems mostly normal, perhaps 20 degrees would be better or worse?)
    BLM = 114 (poor, 128 would be ideal)

    The correction factor for 114 BLM is 114/128 = 0.89. So try multiplying the VE value for cell 900 RPM's ~ 40 KPa by 0.89 to get the idle BLM averages closer to 128. Let's see what happens after correcting the VE table, before making changes to the spark table.

    dave w

Similar Threads

  1. Making History Tables in TunerPro
    By EagleMark in forum TunerPro Tuning Talk
    Replies: 17
    Last Post: 12-28-2018, 08:58 AM
  2. $E6 History Tables and Tuning
    By Havens78 in forum GM EFI Systems
    Replies: 3
    Last Post: 10-25-2016, 05:48 AM
  3. How to tune without blm history tables?
    By f85gtron in forum TunerPro Tuning Talk
    Replies: 5
    Last Post: 08-09-2015, 06:14 PM
  4. $59 F88/89 idle speed stabilizer tables
    By 34blazer in forum GM EFI Systems
    Replies: 13
    Last Post: 11-06-2013, 04:31 AM
  5. TunerPro History Tables, Data Transfer?
    By EagleMark in forum TunerPro Tuning Talk
    Replies: 4
    Last Post: 01-11-2013, 05:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •