Results 1 to 2 of 2

Thread: Getting WB to log with 1227730 ECM.

  1. #1
    Carb and Points! T4Turtle's Avatar
    Join Date
    Jul 2018
    Age
    53
    Posts
    3

    Getting WB to log with 1227730 ECM.

    Cannot get live WB data to show in TunerProRT. I am using an Innovate LM2 and have set it up to output the A/F ratio and it shows 5 Volts output at 20.8 A/F and about 2.7 Volts at 15.8 A/F. I also tried both F14 and A3 pins and setup in the bin accordingly. Also setup for Raw A/D and used formula (X*0.05875) + 7.350000.

    I attached my bins and adx files
    Attached Files Attached Files
    Last edited by T4Turtle; 10-18-2018 at 06:24 PM.

  2. #2
    Carb and Points! T4Turtle's Avatar
    Join Date
    Jul 2018
    Age
    53
    Posts
    3
    This was solved by using a tamper free S_AUJP bin. If I copy and paste the original tune bin into S_AUJP it does not work.

Similar Threads

  1. 1227730 ECU. $1F to $8D mask ID?
    By 0midnight5 in forum GM EFI Systems
    Replies: 2
    Last Post: 11-19-2017, 08:07 AM
  2. 1227730 ECM
    By 7399MGM in forum Introductions
    Replies: 0
    Last Post: 09-18-2013, 09:24 PM
  3. 1227730 ecm's
    By Tunedperformance in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 04-11-2012, 06:50 AM
  4. 1227730 ECM information
    By Six_Shooter in forum GM ECM - Bins - TunerPro Definition Files - Wiring Diagrams - Tuner Info!
    Replies: 7
    Last Post: 11-23-2011, 10:19 PM
  5. 1227730 ecm's
    By Tunedperformance in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 11-01-2011, 11:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •