Is there a way to use an android tablet for a TP dash display ?
I have a nice 10" model collecting dust that would make a nice dash.
Is there a way to use an android tablet for a TP dash display ?
I have a nice 10" model collecting dust that would make a nice dash.
Dean
ALDLDroid uses Tuner Pro files and has a customizable dash.
The man who says something is impossible, is usually interrupted by the man doing it.
I am revisiting this subject, I purchased and installed ALDLdroid on a Samsung 10" Galaxy Note model SM-P605V tablet.
I transferred my working adx file to the adx folder in the app, the menu items show up on it as expected and I moved / edited some to make a simple test dash display.
So far all went well but..... I try to connect via usb using a female-female usb coupler from the cable from my moates aldl box to a usb-mini usb cable into the table. No workie
Anyone have any tips to help make this connect ?
Is the adx file the only one it needs or does the xdf also need to be in there or ??
Dean
only the adx is needed
it's probably an issue with your cabling
there's a (small) difference between a female to female usb coupler (which is a mostly useless device) and a usb OTG adaptor
you need an OTG adaptor so your tablet can connect to a usb device through a port which usually goes the other way
tablet also needs to support usb host mode (think that one does)
Thanks, I will try that adapter.
Dean
dktool
One other thing to check is that the ADX file is not set to receive via Bluetooth. If it is it may not work with a cable.
This is the RS232 checkbox in the tuner pro ADX editor.
A quick way to check is look at the ADX file, (use note pad to open it)
example
<!-- Written 09/12/2017 17:18:22 -->
<ADXHEADER>
<guid>18af8016-89a1-4b91-8b8a-92d2d7d416c3</guid>
<flags>0x10000</flags>
<objectcount>50</objectcoun
This shows the flag 0x10000 this indicates RS232 not set
If it was 0x01 the rs232 is set.
Make changes using tuner pro editor.
I've tried an early 10" Samsung tablet via Bluetooth ok, so right settings and cable it should work.
MOC
Ford 28 Roadster Pick Up
Ford Flathead 51 8BA. Balanced, ported,3/4 cam, Edelbrock 59A heads, C4 trans, 8" diff 3.55 narrowed 40mm /side.
Fuel injection by Flatattack racing, 60mm Holden TB.
ECM Delco 1227808 160 baud.
Steveo nailed it, I received the OTG adapter, plugged in and the tablet asked permission to use the usb for the app and that was it ......... instant data.
This app is also much easier to edit the display, move and resize the data then using the laptop with TP
Dean
Bookmarks