new member/eehack; compability Windows 10?

**olan** · 09-02-2018

Hi, I´m a new member since yesterday. Seems to be a nice community you have here!
I´m living in Stockholm, Sweden and bought a Buick Roadmaster Wagon -95 last spring. Great car!
I want to adress an issue at once: I downloaded eehack http://fbodytech.com/eehack-2/download-eehack/ to be able to read my PCM.
It seems to be fine with the actual reading (cable connection with PC and running Windows 10 op system), everything seems to be as it should.
The display message after done is that it read succesful. The problem is the saving.
The files are not showing in the folder I directed it to, folder is empty. File Explorer, however, show them in "Recent" mode but the file is empty; 0 byte.
I´ve downloaded the program twice, made an exception for the program and files in firewall (Norton), Windows firewall is not active.
What could be the problem here? Bugs with the program and Windows 10?
Thankful for any comment or thought!

**steveo** · 09-02-2018

someone else had a problem with bin reads being saved before. i forget what the solution is but i'll try to dig up the old thread.

in the meantime, if you have the calibration number i probably have the bin on my site

**olan** · 09-04-2018

Thanks for looking in to this! If you can find the solution it would be great. Concerning the calibration number I don´t really know what it refers to. Where can I find it?

**steveo** · 09-04-2018

Originally Posted by olan

Thanks for looking in to this! If you can find the solution it would be great. Concerning the calibration number I don´t really know what it refers to. Where can I find it?

in the main datalog window, after you've connected and have started logging, bottom center of the screen. says CAL ID#

**steveo** · 09-04-2018

and here are the bins: http://fbodytech.com/bin-files-2/bin-files/

**olan** · 09-06-2018

Ok, thanks! So this bin is what I should work with: 16209321 (Buick Roadmaster EW -95)?
Just so I get you right; should I write the bin to the PCM and thereby be able to save the datalog through eehack? If not so, please provide a short manual of how to get about.