Results 1 to 2 of 2

Thread: Hi Y'all

  1. #1
    Carb and Points!
    Join Date
    Aug 2018
    Posts
    1

    Hi Y'all

    Reworking a '91 vette. Popped in here to learn a bit about tuning. Have all the equipment from Moates to do it. Replaced the engine, it's now a 4 -bolt zero decked block with forged pistons, Edelbrock ETEC170 heads, ZZ-6 cam, roller lifters and rockers, Edelbrock high flow base, large runners, ported plenum, 52mm throttle body, MSD 6AL, boosted fuel pressure, 24lb injectors, larger all aluminum radiator. Trans reworked by ZF DOC, clutch is Carolina clutch stage 2 single mass conversion. Only piece remaining to get on the road is completing the radiator install. The increased size required modifying the shrouds. Got some from a wreck and am in the process of getting them squared away. Shouldn't take long after the weather gets a bit more cooperative here in AZ. Too darn hot in the garage to do a lot right now. Any way this should be enough to see who I am. Oh, I'm retired now too from an electrical engineering career. Doing something now that is really fun.
    Last edited by boomer; 08-26-2018 at 01:16 AM.

  2. #2
    Fuel Injected! Queencityspeed's Avatar
    Join Date
    Oct 2016
    Age
    49
    Posts
    35
    Welcome. Lots of info and great folks here.

Similar Threads

  1. Good evening Y'all new guy here......
    By DangerDanNH in forum GM EFI Systems
    Replies: 6
    Last Post: 01-24-2017, 09:35 PM
  2. HEY Y'ALL!
    By revscott58 in forum Introductions
    Replies: 1
    Last Post: 06-30-2014, 09:34 PM
  3. Hello y'all
    By pavement pounder in forum Introductions
    Replies: 2
    Last Post: 10-14-2013, 04:04 PM
  4. Hey y'all!
    By X-cabsquarebody in forum Introductions
    Replies: 1
    Last Post: 07-04-2013, 03:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •