Results 1 to 14 of 14

Thread: Serv No 16196396

  1. #1
    Carb and Points!
    Join Date
    Aug 2018
    Age
    52
    Posts
    7

    Serv No 16196396

    Amazing site, guys!

    I'm wanting to view the live data and possibly log my '95 K1500 5.7 litre 5 speed. The ECM is:
    Serv No 16196396
    BDUY

    I've been doing a little digging and think I'm headed in the right direction, but it would awesome if one of you experienced guys would have a look. I was planning to buy a this ALDU1 CABL2 combo from moates:
    https://www.moates.net/aldu1-and-cab....html?cPath=64

    It is says it's for the '95. Is there something special about the '95 models that requires the unique combo?

    I was planning to use TunePro RT v5 or is there something else that would work better? I've located a couple ADX files in threads on this site but I'm not certain they are the correct ones for my truck.

    http://www.gearhead-efi.com/Fuel-Inj...ll=1#post17026

    http://www.gearhead-efi.com/Fuel-Inj...ll=1#post33373

    Will either of those work?

    Thanks
    Last edited by KoolBreeze; 08-19-2018 at 05:43 AM.

  2. #2
    Fuel Injected!
    Join Date
    Nov 2014
    Age
    39
    Posts
    43
    The 16196396 is a kind of oddball. It is an older style ECM with 160 baud communication and no all in one memcal. You need the CABL1 combo instead.
    1995 K1500, Cadillac 500 TBI with 4L80E swap. 7427 PCM and 454 TBI.

  3. #3
    Carb and Points!
    Join Date
    Aug 2018
    Age
    52
    Posts
    7
    Quote Originally Posted by mihela View Post
    The 16196396 is a kind of oddball. It is an older style ECM with 160 baud communication and no all in one memcal. You need the CABL1 combo instead.
    Thank You! That makes sense, as I've crossed A & B on the ADL before to read the codes and noticed comments about that in the description of the CABL1 set. Will the ADF file reference above work for me? What live data is available on this ECM?
    Last edited by KoolBreeze; 08-20-2018 at 02:05 AM.

  4. #4

  5. #5
    Carb and Points!
    Join Date
    Aug 2018
    Age
    52
    Posts
    7
    Quote Originally Posted by steveo View Post
    you can open the adx in tunerpro without any vehicle connected to see the data list
    Thank you!


    Quote Originally Posted by mihela View Post
    The 16196396 is a kind of oddball. It is an older style ECM with 160 baud communication and no all in one memcal. You need the CABL1 combo instead.
    I ordered the ALDU1 and CABL1 combo package. All I'm interested in doing at this point is viewing the live data and logging, but at some point I may want to take it further. If the 16196396 has no memcal, what does it have instead? Is the chip plug and play or one that requires de-soldering?

  6. #6
    Carb and Points!
    Join Date
    Aug 2018
    Age
    52
    Posts
    7
    Sorry, double post.

  7. #7
    Carb and Points!
    Join Date
    Aug 2018
    Age
    52
    Posts
    7
    Got the ALDU1 and CABL1 from Moates, installed the drivers and connected it to the truck. Oddly the dash board works but the list view does not. Any idea what that could be? Having the 10k mode enabled also caused the idle to increase and the truck to miss badly under load. Hope that didn't hurt anything.

  8. #8
    Carb and Points!
    Join Date
    Aug 2018
    Age
    52
    Posts
    7
    Switched to a different laptop and that solved the problem. Works great now.

  9. #9
    Carb and Points!
    Join Date
    Aug 2018
    Age
    52
    Posts
    7
    Does anyone have newer/better XDF and ADX files than the ones I've attached here?
    Attached Files Attached Files
    Last edited by KoolBreeze; 09-05-2018 at 07:13 AM.

  10. #10
    Fuel Injected!
    Join Date
    Aug 2022
    Age
    30
    Posts
    167
    Quote Originally Posted by KoolBreeze View Post
    Does anyone have newer/better XDF and ADX files than the ones I've attached here?
    thnk you very helpful. i have ecm 16196396 and cant find any support for adx and only ne place i found xdf except for in this thread

  11. #11
    Fuel Injected!
    Join Date
    Aug 2022
    Age
    30
    Posts
    167
    I also have the BDUY prom coincidentally... also with a 5 speed manual... what are the odds lol

  12. #12
    Fuel Injected!
    Join Date
    Aug 2022
    Age
    30
    Posts
    167
    I have the same set up in my 94. Same ecm, stick shift, and 350 in a k1500. Any ideas on incorporating wide band data into the log on this ecm?

  13. #13
    Fuel Injected!
    Join Date
    Jan 2017
    Posts
    411
    The only way I know of is using Moates APU1...
    http://support.moates.net/autoprom-apu1/

  14. #14
    Fuel Injected!
    Join Date
    Aug 2022
    Age
    30
    Posts
    167
    It’s discontinued

Similar Threads

  1. Anyone have a GM 16196396 ecm pin out diagram?
    By EDZIP in forum GM EFI Systems
    Replies: 2
    Last Post: 12-06-2015, 07:27 PM
  2. What to log? 16196396 '95 K2500 5.7 NV4500 5sp
    By andyk1500 in forum GM EFI Systems
    Replies: 8
    Last Post: 12-31-2013, 06:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •