Used a tool to make GM o-ring line ends and used a GM TBI filter. I used a patch flex line at the engine and no clamps on anything. All o-ring or double flare.
Feel free to criticize. I am learning this is my first one. I did move the pump below the bottom of the tank. Picture shows it above the bottom of the tank. Glad to here the bubble is no trouble in the filter.
One source demanded the pre-filter to be vertical to eliminate the bubble. He claimed it would make the pump noisy.
mg3 001.jpgmg3 002.jpgmg3 003.jpgmg3 004.jpg