Somewhere on Moates' website is the setting to get the Autprom data out of your datastream.
Somewhere on Moates' website is the setting to get the Autprom data out of your datastream.
Familiar with 1227747 and 16197427 PCMs
so im looking at the autoprom and there no indication on what wire goes where. I got a black, red, white, and blue from the wideband guage but which order do they go in?...
or is the 4 jacks on autoprom more input channels... so the red doesnt get power from autoprom...and the black still goes to chassis ground...? that leaves the blue and white going to autoprom as input signals for the datastream?
You'll have to read the directions for your wideband. As for the AutoProm there are 4 wire conections, closest to USB cable is ground and other thre a re three input channels.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
ya know ive seen that video befor...
looking at wideband instructions....
red 12v power
black ground
white 0-5v output
blue serial output
so the blue is not going to be used?
hook up the white to autoprom and run a ground
easy enough!....my confusion was brought on by having 4 wires and spots for 4 wires on autoprom. thought they all needed to connect to autoprom...lol...problem solved!
Bookmarks