I'm going to start a project in my s10 97 I'm going to put a sbc 350 with tree 218 @ 224 a .050 with vortec heads and I want to do it efi I like the tpi system of the 90s the one that does not have a maf ... but as I have a little budget to buy an ecm and harness from a model of the 90 I ask you if there is a way for some other computer to do it in tpi system to be programmed with tuner pro and it is not difficult for me to make a harness as measured and listened to the ecm of 6 cylinders of the 3.1 can be modified sera sierto that beforehand thanks