Hello! I have a 1991 S-10 2.5L VIN A Iron Duke 5-speed pickup truck, with the 1227165 ECM and the $94 Mask. I made an ALDL to USB cable to hookup the car computer with my laptop, and it's been working great. I recorded a data log from my truck, for a ~30 minute drive. I looked at the log file, and to me, it looks like all the sensors are okay. I don't have much experience with analyzing ECM data, like I don't understand parameters like BLM and INT. I'd also like someone to have a second look into my data log also and to help me with feedback or suggestions :-).

The thermostat installed is a 180F temperature. Spark plugs are gapped to 0.060. Base timing is 8 degrees BTDC

This is the data log file that I recorded with TunerPro RT V5
http://devster.monkeeh.com/pub/2018-07-31.xdl

This is the XDF file I used for my truck: http://devster.monkeeh.com/pub/94.xdf
This is the ADX file (imported from A139.ads) I used for my truck: http://devster.monkeeh.com/pub/A139.adx

Thank you!