Quote Originally Posted by donf View Post
So how is this used with Tunerpro and a tbi obd1 setup? I looked for the answer to that and have not turned up much. I would not use it on my van, as minimal changes to the original table were easy to do. I can see where it might be useful if you had an engine that needed drastically different shift points. I am mostly just curious what all the fuss is about.
Bulecat will provide Tables for "Normal" Transmission Shift Points and "Normal" TCC Engage / TCC Release.

Screen shot below is OBD1 TunerPro. OBD2 tables are "Usually" the same, maybe worded differently.

dave w

Shift & TCC Tables.jpg