Thanks in advance.
Just need a little info on how to tune with aldldroid with aldl Bluetooth adapter . my car is a 94z28 A4 what i want to adjust or tune are the shift points because i have 3.42 gears in it also afr.
Thanks again for any help.
Thanks in advance.
Just need a little info on how to tune with aldldroid with aldl Bluetooth adapter . my car is a 94z28 A4 what i want to adjust or tune are the shift points because i have 3.42 gears in it also afr.
Thanks again for any help.
Last edited by 718z28; 06-18-2018 at 10:55 AM. Reason: Little more detail
I believe ALDLDroid may be used with the Moates Ostrich on PROM based ECMs. For 1994/1995 LT1's you will want to use EEHack. SteveO on this board is the author of EEHack and a LT1 guru.
Thanks for the reply john. Can i datalog with aldldroid?
Yes i found this forum threw a link on steveo's site i believe its fbodytech.
you will need tunerpro and steveo's eex xdf to make adjustments to the bin(tune) its located here: http://fbodytech.com/eex-tunerpro-definition/
yes you can use aldldroid to log with,you will need the correct adx its located here: http://www.mediafire.com/file/3qdma6...ine-1.adx/file
also is you have a aldl cable to use just use eehack from steveo's fbodytech to log with its located here: http://fbodytech.com/eehack-2/
fbodytech also has a free online tuning service that might help making a starting bin easier for you its located here: http://fbodytech.com/bin-files-2/fre...uning-service/
97z28 A4 obd1 swap(16188051)
Tunerpro Newbie
Thanks for the info jThompson i really appreciate it.
ok i downloaded all the links in your reply i was playing around with tunerpro and i see that there is alot lot that can be modified. i really just want to tune my gears since the 3.42 swap my car shifts in to 3rd gear too early. I also orderd the aldl to usb cable from 1320 electronics. in your opinion what is the easiest program to tune with or best?
I data log using John's (1320 Electronics) bluetooth ALDL adapter and his free ALDL Scan Tool program on my android phone. It works fine. I am not great at getting the data out so it looks pretty, but its there.
On my van the shift table is pretty much all I have changed so far. With my situation the factory tune likes to lug the engine down. Doing small changes in Tuner Pro then driving it, then changing it more, seems to have great results for me. I did try logging in tuner pro but the phone seems to be easier for me. I will try it again soon.
Last edited by donf; 06-21-2018 at 03:12 AM.
Bookmarks