Results 1 to 12 of 12

Thread: 24x7 flash tool

  1. #1
    Fuel Injected!
    Join Date
    Aug 2012
    Posts
    386

    24x7 flash tool

    3 or 4 years ago there were threads using dimented24x7 flash tool. I think maybe the only people that got it to work were computer savy folks. It has been pretty quiet for years. So my question did any ordinary gearheads ever get it to work?
    6395, BHDF, 7.4 BBC lightly modded now 6395 BMHM back to BHDF

  2. #2
    Fuel Injected! sturgillbd's Avatar
    Join Date
    Jun 2012
    Location
    Big Stone Gap, VA
    Age
    50
    Posts
    504
    I have read and wrote bins with it on a bench I hope to play with it soon.

  3. #3
    Fuel Injected!
    Join Date
    Aug 2012
    Posts
    386
    Please post any success you have. Thanks.
    6395, BHDF, 7.4 BBC lightly modded now 6395 BMHM back to BHDF

  4. #4
    Fuel Injected!
    Join Date
    Jun 2015
    Age
    36
    Posts
    354
    I use it to do bench flashing, it works fine. It has ZERO safety protocols built in, so if you do not know exactly how the original creator intended for it to be used, it's very easy to ruin your PCM with it. There is absolutely nothing that will stop you from bricking your PCM, except knowing how to use the program-and there is no help file other than the instructions in the program.

  5. #5
    Fuel Injected!
    Join Date
    Dec 2014
    Age
    41
    Posts
    61
    I went down this path as well.

    I bought the AVT-852 cable because it was the cheaper option, then used Tuner Po and the 24x7 dimented tool.

    It will only write the same OS to the PCM. If you try to flash a different OS it bricks, if you try to flash certain OS partial writes, it bricks.
    If you follow all of the steps exactly as they are, and only stick to the 1 OS and have a proper XDF with all of the parameters you need, you might be ok.

    Trust me, its A LOT cheaper to just buy HP Tuners.

    You can plug and play, read/write tunes, there's a wealth of info and tune repository to choose from on the forums.
    I'm a computer guy, and even for me, the amount of shit you have to go through and learn for it all, it's not worth it, and once you brick a couple of PCMs trying to get shit working, it's really not worth the hassle.

    Just my AUD$0.0026c

  6. #6
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    42
    Posts
    72
    Quote Originally Posted by evilstuie View Post
    I went down this path as well.

    I bought the AVT-852 cable because it was the cheaper option, then used Tuner Po and the 24x7 dimented tool.

    It will only write the same OS to the PCM. If you try to flash a different OS it bricks, if you try to flash certain OS partial writes, it bricks.
    If you follow all of the steps exactly as they are, and only stick to the 1 OS and have a proper XDF with all of the parameters you need, you might be ok.

    Trust me, its A LOT cheaper to just buy HP Tuners.

    You can plug and play, read/write tunes, there's a wealth of info and tune repository to choose from on the forums.
    I'm a computer guy, and even for me, the amount of shit you have to go through and learn for it all, it's not worth it, and once you brick a couple of PCMs trying to get shit working, it's really not worth the hassle.

    Just my AUD$0.0026c
    In the past tools were written by one person and they wrote if for them self knowing how to use it. Well that's no longer the case, myself and a group of others have been working on a true low cost method to the masses that's safe and easy to use. Rather then one person doing this solo again we have a team of some of the best guys other there working on this each doing what they do best.

    Example of the Avt 852 and a J 2534 tool both reading a 512K pcm.
    https://www.youtube.com/watch?v=CkAnKuJNZec

    For tuning..... there are a couple of guys working on Xdf's. Right now coverage is limited but that's changing fast. Once again this hasn't fallen onto one person to try and do but a group of people working together with one common goal. 100% Free flashing with cheap hardware. We are getting pretty close to being able to release the read side of this, once we are happy with how it works and will start on the write side of the tool.

  7. #7
    Fuel Injected!
    Join Date
    Dec 2014
    Age
    41
    Posts
    61
    Quote Originally Posted by PeteS View Post
    In the past tools were written by one person and they wrote if for them self knowing how to use it. Well that's no longer the case, myself and a group of others have been working on a true low cost method to the masses that's safe and easy to use. Rather then one person doing this solo again we have a team of some of the best guys other there working on this each doing what they do best.

    Example of the Avt 852 and a J 2534 tool both reading a 512K pcm.
    https://www.youtube.com/watch?v=CkAnKuJNZec

    For tuning..... there are a couple of guys working on Xdf's. Right now coverage is limited but that's changing fast. Once again this hasn't fallen onto one person to try and do but a group of people working together with one common goal. 100% Free flashing with cheap hardware. We are getting pretty close to being able to release the read side of this, once we are happy with how it works and will start on the write side of the tool.

    I understand that, but the more accurate history of the DIY LS1 tool is that those who successfully do it, commercialise it and the DIY community is left again without a tool. A good indication of that is YouTube videos of a tool working as opposed to usuable versions of the software, or transparency on the code etc.

    I'm not saying that's what you're doing, but for the time and money spent on something that may or may not finish, a commercial option that has been tested and verified by the market may be a better option for some.
    I'm biased as I tried the cheap alternatives and was burnt, I'm just letting the OP know my experiences and helping them to not walk the same expensive path I did.

  8. #8
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    42
    Posts
    72
    Quote Originally Posted by evilstuie View Post
    I understand that, but the more accurate history of the DIY LS1 tool is that those who successfully do it, commercialise it and the DIY community is left again without a tool. A good indication of that is YouTube videos of a tool working as opposed to usuable versions of the software, or transparency on the code etc.

    I'm not saying that's what you're doing, but for the time and money spent on something that may or may not finish, a commercial option that has been tested and verified by the market may be a better option for some.
    I'm biased as I tried the cheap alternatives and was burnt, I'm just letting the OP know my experiences and helping them to not walk the same expensive path I did.
    Then fork it

    https://github.com/LegacyNsfw/PcmHacks

  9. #9
    Fuel Injected!
    Join Date
    Dec 2014
    Age
    41
    Posts
    61
    This is one of those occasions where I'm quite happy to say I'm wrong.
    Cheers.

  10. #10
    Fuel Injected!
    Join Date
    Aug 2012
    Posts
    386
    I am standing by with a truck, black box and 0411. With the amount of development time I can certainly see why developers switch to commercial deals. When it gets so a non computer person can use it for a few hundred bucks, I just want to say ahead of time I really really appreciate your effort.
    6395, BHDF, 7.4 BBC lightly modded now 6395 BMHM back to BHDF

  11. #11
    Fuel Injected!
    Join Date
    Dec 2015
    Age
    42
    Posts
    72
    Quote Originally Posted by myburb View Post
    When it gets so a non computer person can use it for a few hundred bucks, I just want to say ahead of time I really really appreciate your effort.
    A few hundred bucks is still pretty steep for people that just want to make basic changes. The Allpro USB costs $35 bucks, supports 4x speed and 2048 byte blocks. For a non computer person that means's it's about half the largest possible block sizes but is still a very respectable size to be working with and is more then fast enough for in vehicle use with out running into battery voltage issues.

    We figured that since it was already going to be a time intensive project we might as well go for a home run and support every device made that had the hardware needed to do this. There are going to be thousands of people that already have devices that will be plug and play with the program making this a win for everyone

  12. #12
    Fuel Injected!
    Join Date
    Jan 2012
    Location
    Poland
    Posts
    147
    Quote Originally Posted by evilstuie View Post
    [...]It will only write the same OS to the PCM. If you try to flash a different OS it bricks, if you try to flash certain OS partial writes, it bricks.
    If you follow all of the steps exactly as they are, and only stick to the 1 OS and have a proper XDF with all of the parameters you need, you might be ok.
    Not true, I'm using Dimented's flasher to tune cars on a regular basis and it works great. You can change OS without problems. There's one bug that prevents PCM to be reflashed again, but I have described a fix in another topic.
    I have yet not been able to brick a PCM and have done hundreds of writes using Dimented's tool :)

Similar Threads

  1. LS1 Flash Tool Released
    By antus in forum OBDII Tuning
    Replies: 118
    Last Post: 2 Weeks Ago, 07:02 PM
  2. $EE Flash tool progress
    By steveo in forum GM EFI Systems
    Replies: 112
    Last Post: 12-17-2015, 06:30 PM
  3. Group Buy for LS1 Flash Tool AVT 852 cable!
    By EagleMark in forum OBDII Tuning
    Replies: 73
    Last Post: 03-02-2014, 11:11 PM
  4. Replies: 8
    Last Post: 02-12-2014, 06:25 AM
  5. Memcal Flash Tool
    By EagleMark in forum GM EFI Systems
    Replies: 6
    Last Post: 01-22-2013, 05:26 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •