$EE tuning questions

[Dirtybob]

max out these two constants and the "blips of 15%" should go away

2617 EGR Enable - Coolant Temp(Hi Startup MAT)
2618 EGR Enable - Coolant Temp(Low Startup MAT)

This worked, not seeing any EGR activity in my logs now.

I maxed out the 1292F CAT Protect - Min Coolant Temp (set to 151 Deg C) and am still seeing the odd fuel enrichment activity.
Assuming that this fuel is coming from the CAT Protect routine I'm going to try maxing the CAT Protect Min Temp @ Low/Mid/High and see what happens.
Any suggestions welcome...

[Dirtybob]

Just had the bright idea to compare my bin to a '95 Caprice SS (export) bin.
In addition to the 1292F Min Coolant Temp being maxed; 12929, 1292B, 1292D (CAT Protect Min Temp Low/Mid/High) were also maxed out.
1292E CAT Time before use... is zeroed
12930 CAT Default Temp is maxed

Will try these settings no later than tomorrow after work and post back, however I think it will be fully disabled after this.

[jthompson122183]

This worked, not seeing any EGR activity in my logs now.

That was the same for me also.

Assuming that this fuel is coming from the CAT Protect routine I'm going to try maxing the CAT Protect Min Temp @ Low/Mid/High and see what happens.

That will keep the Cat Protect from kicking in then dumping fuel to cool the Cat. Answered your own question.

[Dirtybob]

I was initially under the (mistaken) impression that maxing the '1292F CAT Protect - Min Coolant Temp' was all that was needed to disable the system.
I've seen the same (incorrect) info elsewhere when searching so I posted it all here...
I will post back after verifying that this does the trick.

[Dirtybob]

Verified, no more CAT Protect routine.