Results 1 to 4 of 4

Thread: New Member of Gearhead EFI

  1. #1
    Carb and Points!
    Join Date
    Feb 2018
    Location
    SW Idaho
    Posts
    1

    New Member of Gearhead EFI

    Hi my name is Jim,

    I grew up with Carbs and distributors and am in the process of restoring a '67 Camaro w/ SBC 350.

    I recently purchased a 1989 RV with a 350 TBI from my Father. He had replaced the worn out 350 with a GM long block with an RV cam. Needless to say the TBI doesn't like the 220/220 114LSA Cam. I purchased the Moates APU1 and TurnerPro RT. I am both excited and nervous about getting into "tuning". From what I can tell this is a great place to learn and share. I am also new to posting on forums, so please provide me any appropriate feedback.

  2. #2
    Fuel Injected!
    Join Date
    Jan 2013
    Age
    77
    Posts
    132
    Welcome, ClassicRV. As for appropriate feedback for you, just jump right in and read, read, read. Once you feel comfortable, plan out what you want to do, give it a shot and, if you run into a problem, read some more, then ask by posting your questions on the forum. There are a bunch of knowledgeable, experienced, and gifted tuners who are all willing to lend a hand and share what they've learned.

    I'm also a carb and distributor, old school, and classic car enthusiast. This stuff represents a challenge as well as full on befuddlement. Good luck!

  3. #3
    Fuel Injected!
    Join Date
    Jan 2013
    Age
    77
    Posts
    132
    Is anyone having problems with this thread? All i see are lines and number...doesn't make sense???

  4. #4
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    No worries. It was spammers.

Similar Threads

  1. New to Gearhead EFI
    By PaZaicC4 in forum Introductions
    Replies: 0
    Last Post: 04-22-2018, 11:07 PM
  2. New to Gearhead
    By Steve A in forum Introductions
    Replies: 6
    Last Post: 02-01-2015, 10:10 PM
  3. Another new to Gearhead
    By Cornchip in forum Introductions
    Replies: 0
    Last Post: 03-28-2013, 04:47 AM
  4. New to GearHead
    By buddyneal in forum Introductions
    Replies: 4
    Last Post: 03-25-2013, 06:46 PM
  5. New to GearHead EFI
    By POZE in forum Introductions
    Replies: 1
    Last Post: 03-18-2012, 07:12 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •