Results 1 to 5 of 5

Thread: TunerPro RT not logging WB O2

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 04-27-2018 #1
    Dom
    Dom is offline
    Fuel Injected!
    Join Date
    Apr 2015
    Location
    Albuquerque, NM
    Posts
    52

    TunerPro RT not logging WB O2

    Need help. Finally got a wide band o2 sensor installed (MTX-L 0v = 7.35 5v = 22.39 AFR) connected to Pin 16 on my ecm. The hard ware is working.
    Made math adjustments in TunerPro RT ADX file but i must be missing something, tunerPro don't see anything in the wide band o2 log. atached is the ADX file
    Attached Files Attached Files
    Last edited by Dom; 05-01-2018 at 03:43 AM.
    1993 Chevy Blazer TBI Vortec long block 5.7
    16168625 BDJZ 46mm TB 18 PSI fuel
    Camshaft, Hydraulic Roller Tappet, Advertised Duration 288/308, Lift .431/.451
    Chevrolet Performance Vortec TBI Intake Manifold
    shorty's, y-pipe and 3" full boar muffler
    Reply With Quote Reply With Quote
« Looking for recomended Tuner | Shift table adjustment??? »

Similar Threads

  1. wideband logging
    By steveo in forum GM EFI Systems
    Replies: 68
    Last Post: 12-21-2018, 01:53 PM
  2. Newbie, Vette -90, logging with TunerPro
    By Robban_C in forum GM EFI Systems
    Replies: 2
    Last Post: 08-01-2016, 01:46 AM
  3. New to TBI Data logging and such.
    By georgeb in forum Introductions
    Replies: 30
    Last Post: 08-11-2015, 04:29 AM
  4. TunerPro newbie having logging problems - erratic data
    By bobdec in forum TunerPro Tuning Talk
    Replies: 3
    Last Post: 02-07-2013, 02:36 AM
  5. Winaldl VS Tunerpro for logging
    By CDeeZ in forum GM EFI Systems
    Replies: 9
    Last Post: 05-15-2012, 02:42 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules