Results 1 to 15 of 29

Thread: Weird $OD Spark Advanced FIXED, sorta

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    Fort Smith, Ar
    Age
    50
    Posts
    60
    i had a simalar issue recently, ended up being the new balancer had the timing mark in the wrong spot due to a timing cover change. new balancer was at 12:00 old one was over on the side like an old school timing tab... i was starting out with seriously negative timing instead of 0 degrees......

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,346
    Quote Originally Posted by skandolis View Post
    i had a simalar issue recently, ended up being the new balancer had the timing mark in the wrong spot due to a timing cover change. new balancer was at 12:00 old one was over on the side like an old school timing tab... i was starting out with seriously negative timing instead of 0 degrees......
    Thanks for the post. I didn't even think about the harmonic balancer timing indicator could be inaccurate. If, or when the truck is available to me again, I will put a degree wheel on the harmonic balancer and verify TDC.

    dave w

  3. #3
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Newzealand
    Posts
    483
    My guess is there's a spark bias scaler set at 0 instead of 20

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,346
    Quote Originally Posted by delcowizzid View Post
    My guess is there's a spark bias scaler set at 0 instead of 20
    That's an interesting thought. I tested with a stock Memcal. I even downloaded the same BCC from this site, found Zero differences.

    dave w

  5. #5
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    washington indiana
    Age
    69
    Posts
    884
    sometimes i have to put a,b and so on in the file i started with my files get corrupted some times for no reason?

  6. #6
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Newzealand
    Posts
    483
    Can you add a link to the files or add the xdf adx and the stock bin here that you are using

  7. #7
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,346
    Quote Originally Posted by delcowizzid View Post
    Can you add a link to the files or add the xdf adx and the stock bin here that you are using
    http://www.gearhead-efi.com/Fuel-Inj...Information-0D

    dave w

  8. #8
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,346
    Quote Originally Posted by ony View Post
    sometimes i have to put a,b and so on in the file i started with my files get corrupted some times for no reason?
    I used my Ostrich 2.0 to verify buffer with chip to confirm the Memcal file vs. the file I downloaded from gearhead-efi.

  9. #9
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Newzealand
    Posts
    483
    Your guys xdfs are weird I wondered why the factory cal only had 15 degrees at 100kpa its setup to minus the bias off the main spark tables for some silly reason edited xdf and pow real spark figures 28 degrees up top at full throttle lol.have you ever confirmed actual advance matches commanded advance before this issue

Similar Threads

  1. budget build questions for the advanced tuners 6825 ecm $0d bin
    By jim_in_dorris in forum GM EFI Systems
    Replies: 32
    Last Post: 05-15-2017, 07:54 AM
  2. YAY! Fixed a bricked pcm this morning...
    By babywag in forum OBDII Tuning
    Replies: 10
    Last Post: 01-12-2017, 06:07 PM
  3. An other weird question... LT1 ECU on a TPI???
    By X-cabsquarebody in forum GM EFI Systems
    Replies: 13
    Last Post: 11-08-2014, 06:19 AM
  4. Why is my timing way advanced sometimes?
    By Scrufdog in forum GM EFI Systems
    Replies: 9
    Last Post: 08-22-2014, 06:30 PM
  5. Twenty Thousand Degrees Advanced
    By ericburgundy in forum TunerPro Tuning Talk
    Replies: 16
    Last Post: 07-20-2014, 09:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •