Results 1 to 2 of 2

Thread: LT1 Long Tube .bin??

  1. #1
    Carb and Points!
    Join Date
    Apr 2018
    Location
    Virginia
    Posts
    5

    LT1 Long Tube .bin??

    I have been looking around for a couple nights now and cant find a .bin for a 94 LT1 with EGR/AIR PUMP/CATS have been removed and long tube headers. Still very new to all of this, so if some one can point me in the right direction that would greatly appreciated.

    Also would low BLM (108) indicate a lean or rich condition, the O2's are cycling from 0-1000mv.

  2. #2
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    first of all, it's worth noting that 108 is as low as it goes (in a default bin) which means it can't really correct any more

    to answer your question, a blm LOWER than 128 means fuel was REMOVED (in other words your engine WAS running RICH, and the mixture was LEANED to correct it). hope that makes sense. longtubes alone shouldn't be that dramatic of an effect.

    don't look online for 'starter bins', they're mostly garbage.

    you can generate a "starter bin" with this tool i wrote: http://fbodytech.com/bin-files-2/fre...uning-service/

    but really, if you want to learn to tune, you will have to make your own bin, and if you don't want to learn to tune...........what are you doing here?

    use the EEX XDF in category view

    read http://fbodytech.com/tutorials/tuning-for-headers/

    for the emissions stuff mostly just disable the error codes in Error checking category, but for EGR, also set the Min RPM to 6375 and the Max RPM to zero.

Similar Threads

  1. Long Time Diy EFI Lurker
    By stew86MCSS396 in forum Introductions
    Replies: 2
    Last Post: 01-30-2017, 03:16 AM
  2. A long road ahead....
    By Kitch in forum GM EFI Systems
    Replies: 16
    Last Post: 07-11-2015, 02:13 AM
  3. Long time gone and now I have to relearn...
    By fuzzcar in forum GM EFI Systems
    Replies: 15
    Last Post: 07-16-2014, 02:38 AM
  4. hello forom long island
    By 188ford in forum Introductions
    Replies: 1
    Last Post: 12-23-2013, 08:10 PM
  5. cant escape the long arm of the law...
    By 34blazer in forum Gear Heads
    Replies: 7
    Last Post: 09-27-2012, 05:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •