I have a 57 Belair with a 327 cu.in. which I have installed an Edlebrock TPI from an 87 Camaro. After wiring in the stock harness and burning a new chip with $32b mask, it started and ran, but idled at 2500 rpm. I deleted the EGR on the manifold, deleted the 9th injector, have no Knock sensor, and didn't have a coolant temp sensor. I was told I need that for the TPI to function properly. When I installed a new temp sensor, the engine wouldn't start. I quadruple checked the wiring and it is right. What do I need to change in the program to get it to run and idle like it should?