Results 1 to 3 of 3

Thread: Hi, Need help with my project.

  1. #1
    Carb and Points!
    Join Date
    Apr 2018
    Posts
    1

    Hi, Need help with my project.

    I have a 57 Belair with a 327 cu.in. which I have installed an Edlebrock TPI from an 87 Camaro. After wiring in the stock harness and burning a new chip with $32b mask, it started and ran, but idled at 2500 rpm. I deleted the EGR on the manifold, deleted the 9th injector, have no Knock sensor, and didn't have a coolant temp sensor. I was told I need that for the TPI to function properly. When I installed a new temp sensor, the engine wouldn't start. I quadruple checked the wiring and it is right. What do I need to change in the program to get it to run and idle like it should?

  2. #2
    Fuel Injected!
    Join Date
    Jan 2017
    Posts
    411
    One year 1989 9th injector was deleted so you might have better luck starting here:
    http://www.gearhead-efi.com/Fuel-Inj...Information-6E

  3. #3
    Fuel Injected! Jim_Rockford's Avatar
    Join Date
    Sep 2015
    Location
    Shelby,N.C.
    Age
    52
    Posts
    53
    Gonna need that knock sensor too
    1986 Pontiac Bonneville 305/2004r rebuilt and 3.42 rear gears.
    1999 9C3 Lumina L67 .4T65E-hd
    2004 E250 5.4r75w dana 60 rear with 3.73 gears

Similar Threads

  1. New guy old project
    By The Stickman in forum Introductions
    Replies: 1
    Last Post: 04-24-2015, 05:26 AM
  2. Need help on new project
    By SuperHbody in forum GM EFI Systems
    Replies: 0
    Last Post: 01-05-2015, 06:45 AM
  3. Another TPI Project..
    By ezobens in forum GM EFI Systems
    Replies: 16
    Last Post: 01-20-2014, 05:49 PM
  4. New TPI project
    By oneowner in forum GM EFI Systems
    Replies: 8
    Last Post: 12-27-2013, 05:33 PM
  5. 85 k5 project?
    By mjc in forum GM EFI Systems
    Replies: 0
    Last Post: 12-24-2013, 01:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •