Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19

Thread: Need a chip burned 1992 B4C camaro

  1. #16
    Fuel Injected! Jim_Rockford's Avatar
    Join Date
    Sep 2015
    Location
    Shelby,N.C.
    Age
    47
    Posts
    38
    G1 adapter ordered the other day so I should have everything now. really wish I would have ordered the adapter the same time as the ostrich but someone said I didnt need it.
    1992 Camaro B4C 355 zz4 cam blue print 195cc heads 10-1 cr SDPP vortec lower, edelbrock hi flo runners ported upper dyno don coated headers /WC 5 speed 3.45 gears .

  2. #17
    Fuel Injected! Jim_Rockford's Avatar
    Join Date
    Sep 2015
    Location
    Shelby,N.C.
    Age
    47
    Posts
    38
    OK fixing to start tuning, I noticed the chip is AXYC that come up as a 90 f car 305 5 speed, Mine is a 92 ..... soory I had it listed as TC it was actually YC ok I found someone else on line that had a 92 B4C 305 /5 speed that had the factory replacement ECM with the same chip so that doesnt seem to be a problem
    Last edited by Jim_Rockford; 4 Weeks Ago at 06:42 AM.
    1992 Camaro B4C 355 zz4 cam blue print 195cc heads 10-1 cr SDPP vortec lower, edelbrock hi flo runners ported upper dyno don coated headers /WC 5 speed 3.45 gears .

  3. #18
    Fuel Injected! Jim_Rockford's Avatar
    Join Date
    Sep 2015
    Location
    Shelby,N.C.
    Age
    47
    Posts
    38
    OK Im kinda lost, I have a good deal of paperwork printed out describing what all the functions do, but I really dont know where to begin with my tuning, If I install the tuning adapter without a chip piggybacking it, I will not have any tune correct? ok I found a .Bin file from a factory 92 5.7 a4 factory replacement memcal, opened it up in tunercat and set the manual trans, and adjusted the timing chart down a bit in the upper rpms, knowing the vortec chambers wont need that much timing, it was pretty high. Also is there a way to read the tune off my current chip? My car has always had the primary fan come on , eve if the temp switch is disconnected and I wondered if that was a cop tune thing to keep the engine cool as possible .
    Last edited by Jim_Rockford; 4 Days Ago at 07:09 PM.
    1992 Camaro B4C 355 zz4 cam blue print 195cc heads 10-1 cr SDPP vortec lower, edelbrock hi flo runners ported upper dyno don coated headers /WC 5 speed 3.45 gears .

  4. #19

Similar Threads

  1. Now that's a burned valve!
    By jim_in_dorris in forum Gear Heads
    Replies: 5
    Last Post: 4 Days Ago, 06:13 PM
  2. May need a chip burned for 87 LO3 with 14097395 cam
    By studboltgkw in forum GM EFI Systems
    Replies: 13
    Last Post: 05-05-2017, 02:04 PM
  3. No CEL, No Start with Newly Burned EEPROM
    By paulo57509 in forum GM EFI Systems
    Replies: 1
    Last Post: 07-19-2016, 08:44 PM
  4. Replies: 58
    Last Post: 08-07-2013, 11:20 AM
  5. ECM1 burned... causes?
    By Xenon in forum GM EFI Systems
    Replies: 4
    Last Post: 04-18-2012, 09:40 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •