Results 1 to 15 of 29

Thread: Need a chip burned 1992 B4C camaro

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected! Jim_Rockford's Avatar
    Join Date
    Sep 2015
    Location
    Shelby,N.C.
    Age
    52
    Posts
    53
    yea I read that and didnt get a chance to delete it
    1986 Pontiac Bonneville 305/2004r rebuilt and 3.42 rear gears.
    1999 9C3 Lumina L67 .4T65E-hd
    2004 E250 5.4r75w dana 60 rear with 3.73 gears

  2. #2
    Fuel Injected! Jim_Rockford's Avatar
    Join Date
    Sep 2015
    Location
    Shelby,N.C.
    Age
    52
    Posts
    53
    Next question, does the Ostrich 2.0 do everything of will I need a socket adapter . I checked and it is the "730" ecm
    1986 Pontiac Bonneville 305/2004r rebuilt and 3.42 rear gears.
    1999 9C3 Lumina L67 .4T65E-hd
    2004 E250 5.4r75w dana 60 rear with 3.73 gears

  3. #3
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,868
    Hello Jim_Rockford,

    The Ostrich 2.0 will work with the 1227730 without a socket adapter.

  4. #4
    Fuel Injected! Jim_Rockford's Avatar
    Join Date
    Sep 2015
    Location
    Shelby,N.C.
    Age
    52
    Posts
    53
    Sorry for the late reply, Im working on moving to Fla. I drove the car yesterday, runs pretty good, having clutch problems so I couldn't drive it like I stole it, I hope to be able to start on getting this stuff when I get down there.
    IMG_20170814_193314.jpg
    Last edited by Jim_Rockford; 03-28-2018 at 01:23 AM.
    1986 Pontiac Bonneville 305/2004r rebuilt and 3.42 rear gears.
    1999 9C3 Lumina L67 .4T65E-hd
    2004 E250 5.4r75w dana 60 rear with 3.73 gears

  5. #5
    Fuel Injected! Jim_Rockford's Avatar
    Join Date
    Sep 2015
    Location
    Shelby,N.C.
    Age
    52
    Posts
    53
    OK Im down in Fla and kinda settled, Im gonna order all m stuff to tune with, I drove the car some more, and it loads up in 5th, you have to pull it down into 4th to drive it, Can I send someone a data log and get a temp chip to tide me over till my crap comes in? just found one on Ebay for 162 shipped . figure that wasnt bad...
    Last edited by Jim_Rockford; 04-22-2018 at 04:03 AM.
    1986 Pontiac Bonneville 305/2004r rebuilt and 3.42 rear gears.
    1999 9C3 Lumina L67 .4T65E-hd
    2004 E250 5.4r75w dana 60 rear with 3.73 gears

  6. #6
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,345
    I could help you with a chip. I would use the Moates.net G1 adapter, with the chip installed into the adapter, see attached picture.

    Send me a Private Message (PM) if your interested in the details. It's likely the parts from Moates.net will get to Florida faster than I can get parts to you from Washington State.

    The G1 adapter can also be used with an Ostrich 2.0 chip emulator. (see picture below)

    dave w
    Attached Images Attached Images

  7. #7
    Fuel Injected! Jim_Rockford's Avatar
    Join Date
    Sep 2015
    Location
    Shelby,N.C.
    Age
    52
    Posts
    53
    G1 adapter ordered the other day so I should have everything now. really wish I would have ordered the adapter the same time as the ostrich but someone said I didnt need it.
    1986 Pontiac Bonneville 305/2004r rebuilt and 3.42 rear gears.
    1999 9C3 Lumina L67 .4T65E-hd
    2004 E250 5.4r75w dana 60 rear with 3.73 gears

  8. #8
    Fuel Injected! Jim_Rockford's Avatar
    Join Date
    Sep 2015
    Location
    Shelby,N.C.
    Age
    52
    Posts
    53
    OK fixing to start tuning, I noticed the chip is AXYC that come up as a 90 f car 305 5 speed, Mine is a 92 ..... soory I had it listed as TC it was actually YC ok I found someone else on line that had a 92 B4C 305 /5 speed that had the factory replacement ECM with the same chip so that doesnt seem to be a problem
    Last edited by Jim_Rockford; 07-22-2018 at 04:42 PM.
    1986 Pontiac Bonneville 305/2004r rebuilt and 3.42 rear gears.
    1999 9C3 Lumina L67 .4T65E-hd
    2004 E250 5.4r75w dana 60 rear with 3.73 gears

Similar Threads

  1. Now that's a burned valve!
    By jim_in_dorris in forum Gear Heads
    Replies: 5
    Last Post: 08-16-2018, 04:13 AM
  2. May need a chip burned for 87 LO3 with 14097395 cam
    By studboltgkw in forum GM EFI Systems
    Replies: 13
    Last Post: 05-06-2017, 12:04 AM
  3. No CEL, No Start with Newly Burned EEPROM
    By paulo57509 in forum GM EFI Systems
    Replies: 1
    Last Post: 07-20-2016, 06:44 AM
  4. Replies: 58
    Last Post: 08-07-2013, 09:20 PM
  5. ECM1 burned... causes?
    By Xenon in forum GM EFI Systems
    Replies: 4
    Last Post: 04-18-2012, 07:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •