This is an onboard ALDL connector that I will hardwire into the datastream




FT232RL. I bought 3 of these IIRC, all of them were junk right out of the box except this one. Such is the case with cheap Chinese stuff sometimes.




Stainless steel wire to hold the fuel level arm on where the plastic broke off.




4L80 shift kit instructions and kit contents




Building a E-fan mount




More mockup is under way.




Harley turn signal stalks will be used to bolt the fan mount to the radiatior. Pieces of conduit are used for crush sleeves.




Starting to make a mount for the trans cooler.




4L80 ID tag. This one is an '01 unit.




WB02 and trans temp mounted in a homemade holder. LED to indicate fan ON.




7427 PCM running the show.




Coming together.




I bought a Racetronix fuel pump hotwire kit and used it on my 3 bar SD turbo 6.0 truck. Their customer service is nonexistent, and their wiring is confusing as the color coding is not consistent. Also had a no start issue for several days because of a faulty connector that they supplied. SO..... I built my own hotwire kit for this one!




Added a switched busbar that is hot on key on. Controlled by a relay.