Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 8 of 8

Thread: HPT to BIN conversion needed

  1. #1
    Electronic Ignition! ahmy's Avatar
    Join Date
    Feb 2017
    Age
    33
    Posts
    11

    HPT to BIN conversion needed

    Hi,

    Can someone convert this file for me i`m trying to flash the bin file through a different programmer.

    Thanks
    Attached Files Attached Files

  2. #2
    Fuel Injected! MQQN28's Avatar
    Join Date
    May 2016
    Location
    Melbourne Australia
    Age
    71
    Posts
    48
    ahmy

    Try this, all you may have to do is change the file extension.
    The .HPT extension is so that a particular program will open it, and files with this extension default to this programme. So the other programme will not open a .HPT file.
    I changed the file extension to .bin and read both files in a hex reader and they were the same.
    attachment.bin

    Here are the pic's of the header of each file.
    pic bin.jpgpic php.jpg

    Im not on my home computer but I will load these into tuner pro and save as a binary file to confirm when I get home.
    You may like to try this.

    MOC

    PS
    you may be able to just save the file from the original programme by putting .bin on the end with SAVE AS.
    Last edited by MQQN28; 02-25-2018 at 04:21 PM.
    Ford 28 Roadster Pick Up
    Ford Flathead 51 8BA. Balanced, ported,3/4 cam, Edelbrock 59A heads, C4 trans, 8" diff 3.55 narrowed 40mm /side.
    Fuel injection by Flatattack racing, 60mm Holden TB.
    ECM Delco 1227808 160 baud.

  3. #3
    Electronic Ignition! ahmy's Avatar
    Join Date
    Feb 2017
    Age
    33
    Posts
    11
    Quote Originally Posted by MQQN28 View Post
    ahmy

    Try this, all you may have to do is change the file extension.
    The .HPT extension is so that a particular program will open it, and files with this extension default to this programme. So the other programme will not open a .HPT file.
    I changed the file extension to .bin and read both files in a hex reader and they were the same.
    attachment.bin

    Here are the pic's of the header of each file.
    pic bin.jpgpic php.jpg

    Im not on my home computer but I will load these into tuner pro and save as a binary file to confirm when I get home.
    You may like to try this.

    MOC
    MQQN28

    Appreciate ur input.

    It`s not as easy as just changing the file extension HPT file is encrypted and compressed notice the file size its less than 512 where is the raw bin is actually a 1 mb file, there used to be a calculator conversion app floating around on da web some years back i`m sure some members still have it and i hope they help out with the conversion.

    Not sure if tuner pro can load hpt files though

    Thanks

  4. #4
    The only way is to Flash that file to an actual PCM and read it back as .BIN
    If you can wait, I can do it next Thursday

  5. #5
    Electronic Ignition! ahmy's Avatar
    Join Date
    Feb 2017
    Age
    33
    Posts
    11
    Quote Originally Posted by Montecarlodrag View Post
    The only way is to Flash that file to an actual PCM and read it back as .BIN
    If you can wait, I can do it next Thursday
    Thanks Monte i`d be waiting.

  6. #6
    Electronic Ignition!
    Join Date
    Apr 2017
    Posts
    13
    .....
    Last edited by 2xls1; 03-08-2018 at 07:43 PM. Reason: bad file

  7. #7
    Electronic Ignition!
    Join Date
    Apr 2017
    Posts
    13
    That first file I posted was read in test mode with TC CAN Bus cable and was not a good file. This one was read with the TC Serial cable and opens with a hex editor.
    Attached Files Attached Files

  8. #8
    Electronic Ignition! ahmy's Avatar
    Join Date
    Feb 2017
    Age
    33
    Posts
    11
    Quote Originally Posted by 2xls1 View Post
    That first file I posted was read in test mode with TC CAN Bus cable and was not a good file. This one was read with the TC Serial cable and opens with a hex editor.

    Thanks 2xls1 for the conversion i really appreciate it

Similar Threads

  1. First Conversion Help Needed!
    By mtbraun in forum GM EFI Systems
    Replies: 22
    Last Post: 11-21-2017, 07:38 AM
  2. EGR needed?
    By Bill Kerkhof in forum Fuel Injection Writeups Articles and How to New and Old
    Replies: 9
    Last Post: 04-05-2017, 07:56 AM
  3. $14 ads adx needed
    By f85gtron in forum TunerPro Tuning Talk
    Replies: 1
    Last Post: 01-24-2017, 09:37 PM
  4. $2e 3.4 bin needed
    By f85gtron in forum TunerPro Tuning Talk
    Replies: 4
    Last Post: 11-25-2016, 07:18 PM
  5. Opinions needed!
    By 405cubes in forum GM EFI Systems
    Replies: 26
    Last Post: 11-10-2013, 03:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •