Originally Posted by
bgott
You'll want to use Flash 'n' Burn from moates for this. You'll place your chip into the ZIF socket on the APU-1 with the notch towards the handle, biased away from the handle. Flash 'n' burn should auto detect the APU-1. You'll see a button that says "Load BIN into Buffer". You'll click that then select your bin.
Then I follow this sequence
Erase Chip
Blank Verify
Program Chip
Verify Chip against Buffer
This will burn your bin to the chip.
Then simply place the chip in the G1 Adapter and reinstall the ECU cover and you're done!
Bookmarks