Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 4 of 4

Thread: 7427 PCM with

  1. #1
    Electronic Ignition!
    Join Date
    Jul 2015
    Posts
    18

    7427 PCM with

    I just installed Vortec heads on my 350 GMC Jimmy. I have the 7427 PCM and started working with the BJYL mask. When tuning my VE tables, how do I tune for greater than 100% VE?

  2. #2
    Fuel Injected! sturgillbd's Avatar
    Join Date
    Jun 2012
    Location
    Big Stone Gap, VA
    Age
    45
    Posts
    461
    You don't. Have you viewed your datalogs and looked at your injector duty cycle? You will need approximately ~75lbs/hr +/- of injector to feed the engine with a decent max duty cycle. You can increase your fuel pressure and set the new flow rate in the bin. You will have to then retune your VE .

  3. #3
    Electronic Ignition!
    Join Date
    Jul 2015
    Posts
    18
    Ok Great! I was hesitant to change the fuel rate after I upped the fuel pressure because I thought it wouldn't change the VE tables.

    What i did was put the heavier spring in to up the fuel pressure, then retuned the VE tables without changing the lbs/hr in the bin file. Is there any consequences to doing it this way?

    Thanks!

  4. #4
    Fuel Injected! sturgillbd's Avatar
    Join Date
    Jun 2012
    Location
    Big Stone Gap, VA
    Age
    45
    Posts
    461
    The pcm relies on fuel rate to calculate pulse width for fueling. There are calculators out there but the formula is sqrt (new pressure / old pressure) X old flow rate = new flow rate . You will have better results after changing your fuel rate in the bin.

    HTH
    Brian

Similar Threads

  1. 7427 ECM
    By C2500 in forum GM EFI Systems
    Replies: 1
    Last Post: 01-04-2018, 09:40 AM
  2. 7427 MAF 4L60E Bin
    By halljam70 in forum GM EFI Systems
    Replies: 8
    Last Post: 10-11-2017, 08:47 PM
  3. 7427 0D turn off EGR
    By rsicard in forum GM EFI Systems
    Replies: 2
    Last Post: 02-10-2016, 08:46 PM
  4. Pin out for 7427
    By myburb in forum GM EFI Systems
    Replies: 11
    Last Post: 08-05-2015, 09:55 AM
  5. 305 tpi with 7427 pcm Possible?
    By Aholt91ss in forum GM EFI Systems
    Replies: 67
    Last Post: 08-24-2013, 04:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •