Need bin file

[dktool]

Did you get your Moates items and start feeling your way around TunerPro ?

[C2500]

Dave, 6395 computer with a GM 454 2” TBI

Dean, I have the Moates system and got it up and running. There a lot to take in and hope I can understand what’s going on but I’m up for the challenge

Thanks guys

[dave w]

4L60E? or 4L80E or Transmission ?????

dave w

[C2500]

4l60e trans

[dave w]

The 16196395 PCM is usually $OE (4L80E) http://www.gearhead-efi.com/Fuel-Inj...Information-OE

The 16197427 PCM is usually $OD (4L60E) http://www.gearhead-efi.com/Fuel-Inj...Information-0D

Usually the 16196395 can run $OD without issues.

I've modified Broadcast Code (BCC) BJLH from the above $OD link.

See attached screen shot showing the compare differenced of the stock BJLH vs. Modified BJLH.

The attached Modified BJLH.bin is a "Starter Chip", not a "Tuned Chip". Likely Tuning is still required!

dave w

[myburb]

Just info, I use $OE but interchange 6395 and 7427 with no noticeable difference.

[C2500]

Thanks Dave, I checked again and it is a 6395 ecm and 4l60e trans with 373 rear gears.. thanks burb for that info..
Ill give it a try tomorrow..Thanks again