I have sent out copies of my Android flash app to a hand full of people for testing but its been slow getting feedback. No one has broken a pcm yet that I'm aware of and every one testing has used it at least once for a full flash. While I'm pretty sure there should be no major issues I'm still being very cautious before publicly posting the app.
With that being said if any one would like a copy or the write side of my LS Droid app send me a PM or email and I'll get you a copy. Its only been tested on Android 6.0 and up but it may work on older versions. As for hardware it only works with the Obdlink Lx and Mx bluetooth devices. It supports 3 modes of flashing for the P01 and 3 modes on the P59. They are calibration data only, OS+Calibration or PCM cloning. Flashing only the calibration data takes around 3 minutes for either the P01 or P59. Changing an OS on the P01 is around 12 minutes and Cloning is around 15 minutes. The P59 times are not quite double what the P01 are for OS+Cal and cloning.
While it is unlikely that the app will have an issue this a possibility a flash may fail. That doesn't mean the PCM is really bricked it just means I'd need to work with the person 1 on 1 to sort out what happened and what needs to be done to make the pcm functional again.
Bookmarks