Results 1 to 15 of 133

Thread: Opensource LS Flashing(It's Closer Than You Think)

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #9
    Fuel Injected!
    Join Date
    Jun 2015
    Age
    36
    Posts
    354
    Can you use raw binary data instead of the AVT data interface? To be clearer, are you attempting to emulate the AVT852-E and are looking for less costly hardware, or are you willing to work with a direct serial translator instead?

    If so, I'll have a 1x/4x capable hardware unit posted here shortly. It'll be atmel based so you can run your current VPW implementation if you'd like, I'm putting the old design through the wringer right now to make sure it'll do what you need it to do. Also, you could simply use the Harris or Fairchild bus interface chips to do the hardware, they're discontinued but available through second-source vendors. I have been pulling them from GM body control modules, they're surface mount so you need to be good with a hotplate.

    Also the AVT interface is available directly from AVT, you can buy singles at 250ish dollars each. That's where mine came from.
    Last edited by Xnke; 02-24-2018 at 12:13 PM.

Similar Threads

  1. GM SPS Bench Flashing
    By MYLTWON in forum OBDII Tuning
    Replies: 13
    Last Post: 07-28-2019, 06:11 AM
  2. 1228747 flashing CEL
    By LilJayV10 in forum GM EFI Systems
    Replies: 8
    Last Post: 05-13-2016, 02:52 AM
  3. lt1 flashing not going to happen?
    By rytari in forum GM EFI Systems
    Replies: 5
    Last Post: 10-08-2015, 04:25 AM
  4. Bench Flashing OBD II LT1??
    By dave w in forum OBDII Tuning
    Replies: 4
    Last Post: 01-13-2014, 03:38 AM
  5. Getting closer...
    By JeepsAndGuns in forum Gear Heads
    Replies: 15
    Last Post: 03-13-2012, 02:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •